Difference between revisions of "Dodge Challenger"

From MoparWiki
Jump to: navigation, search
 
(79 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<!-- COPY AND PASTE THIS CODE FOR NEW MODELS AND MODIFY AS APPROPRIATE -->
+
<!-- Please cite your information references when applicable. There is a "Editing Help" link at the bottom of the page for people new to Wikis. Editing is actually very easy -->
  
[[Image:Vanishingpointchallenger.jpg|thumb|400px|Vanishing Point Challenger]]
+
{{Template:TopWiki}}
== [[Background:]] ==
 
<!-- One or two Paragraphs to skim over the big picture -->
 
  
While [[Plymouth]] was one of the first [[Makes]] to introduce a [[Pony Car]] with its 1964 introduction of the [[Barracuda]], its sister division [[Dodge]], had to wait until 1970 for its first Pony Car -- the Challenger. While both the Dodge and Plymouth Pony Cars of 1970-1974 were [[E-Bodies]], the Challenger had a wheelbase 2" longer, mostly for it to compete with the  more luxurious Mercury Cougar.
+
[[Image:Vanishingpointchallenger.jpg|thumb|350px|Vanishing Point Challenger]]
 +
[[Image:1970DodgeChallengerHemi.jpg|thumb|350px|1970 Hemi Challenger]]
 +
[[Image:1970 Dodge Challenger TA.jpg|thumb|350px|Challenger T/A in Panther Pink]]
 +
[[Image:71spad4.jpg|thumb|300px|1971 Challenger R/T]]
 +
[[Image:4388086562 efbec999a1.jpg|thumb|300px|1972 Challenger Rallye]]
 +
[[Image:Dodge challenger ad 73.jpg|thumb|300px|1973 Challenger]]
 +
[[Image:74challenger 2.jpg|thumb|300px|1974 Challenger]]
 +
[[Image:78dodgechallengergtcoupe.jpg|thumb|300px|1978 Challenger Brochure]]
 +
[[Image:Ad dodge challenger red outside 1979.jpg|thumb|300px|1979 Challenger Brochure]]
 +
[[Image:Ad dodge challenger 1980 black silver.jpg|thumb|300px|1980 Challenger Brochure]]
 +
[[Image:Ad dodge challenger black 1982.jpg|thumb|300px|1982 Challenger Brochure]]
 +
[[Image:Challenger06 011600 w800.jpg|thumb|300px|Challenger Concept]]
 +
[[Image:Challenger06 021600 w800.jpg|thumb|300px|Challenger Concept]]
 +
[[Image:Challenger06 inter1600 w800.jpg|thumb|300px|Challenger Concept]]
 +
[[Image:Challenger06 inter21600 w800.jpg|thumb|300px|Challenger Concept]]
 +
[[Image:Challenger06 engine1600 w800.jpg|thumb|300px|Challenger Concept]]
 +
[[Image:2008-dodge-challenger-srt8-1970-1280x960.jpg|thumb|300px|Compare 1970 with 2008 Challenger]]
 +
[[Image:Challengerhouse1.jpg|thumb|300px|[[Old Hippie]]'s Challenger RT with Custom Paint]]
 +
[[Image:2011-mopar-challenger-v10-drag-pak01.jpg|thumb|300px|2011 Drag Pak Exterior]]
 +
[[Image:2011-Dodge-Challenger-V10-Mopar-Drag-Pak-Interior-Design-View.jpg|thumb|300px|2011 V-10 Drag Pack Interior]]
 +
[[Image:2011-mopar-challenger-v10-drag-pak06.jpg|thumb|300px|2011 V-10 Drag Pack Engine]]
 +
[[Image:2011-Mopar-V10-Challenger-Drag-Pak-9.jpg|thumb|300px|2011 V-10 Drag Pack Trunk]]
 +
[[Image:Doug Duell Challenger.jpg|thumb|300px|Doug Duell and his S/S Challenger]]
  
From 1978 to 1982, Dodge sold the 4-cylinder [[Mitsubishi]] Sapporo through its dealers as the Challenger, and Plymouth sold a virtually identical car through its dealers as the [[Sapporo]].
 
  
With Pony Cars making a come back a few years ago, Dodge brought back the American Challenger, after a 34 year absence. Like Ford with the Mustang, and Chevrolet with the Camaro -- the Challenger has a retro look to it, having a close resemblance to the Challenger of the early 70s.
+
== [[Background:]] ==
  
 +
While [[Plymouth]] was one of the first [[Makes]] to introduce a [[Pony Car]] with its 1964 introduction of the [[Barracuda]], its sister division [[Dodge]], had to wait until 1970 for its first Pony Car -- the Challenger. While both the Dodge and Plymouth Pony Cars of 1970-1974 were [[E-Bodies]], the Challenger had a wheelbase 2" longer, mostly for it to compete with the  more luxurious Mercury Cougar.
  
{{Template:Underway}}
+
From 1978 to 1983, Dodge sold a version of the 4-cylinder [[Mitsubishi]] [[Plymouth Sapporo]] through its dealers as the Challenger. The main difference being the colors offered by each of the divisions, and the Sapporo having a Silver colored plastic [[grill]] while the Challenger had a black colored plastic grill.
<!-- Please site your information references when applicable. There is a "Editing Help" link at the bottom of the page for people new to Wikis. Editing is actually very easy -->
 
  
== [[History:]] ==
+
With Pony Cars making a come back a few years ago, in 2008 Dodge brought back the Challenger, after a 34 year absence as an American Pony car. Like Ford with the Mustang, and Chevrolet with the Camaro -- the Challenger has a retro look to it, having a close resemblance to the Challenger of the early 70s.
  
<!-- Background. If the make or model spans decades, then make each decade (IE:1930-1940) a Level Two Headline. -->
+
== 1970 - 1974 Dodge Challenger ==
  
 
=== [[Model Predecessor]] ===  
 
=== [[Model Predecessor]] ===  
Line 29: Line 48:
 
=== [[Export Versions]] ===
 
=== [[Export Versions]] ===
  
The export versions were basically the same as the domestic version. For a brief period they were sold in France through Simca, and a version was assembled in Switzerland to Swiss standard by AMAG. Both version are very rare today.
+
The export versions were basically the same as the domestic version. For a brief period they were sold in France through [[Simca]], and a version was assembled in Switzerland to Swiss standard by AMAG. Both version are very rare today.
  
 
=== 1970 - 1974 Challenger Related Models ===
 
=== 1970 - 1974 Challenger Related Models ===
Line 42: Line 61:
 
* Pontiac Firebird
 
* Pontiac Firebird
 
* Mercury Cougar
 
* Mercury Cougar
 +
* AMC Javelin
  
== [[Year by Year Changes, Production Numbers, and Cost:]] ==
+
=== [[Platform]] ===
<!-- Year-By-Year production numbers, costs, and photos. Use the individual years listed below as the sub-category of year-to-year information -->
 
  
 +
All of the first generation Dodge Challengers were on the 1970-1974 [[E-Body]], which was a modified version of the [[B-Body]] -- as used exclusively for the 197-1974 [[Plymouth]] [[Barracuda]]/[[Cuda]] and Dodge Challenger.
  
=== 1970 ===
+
=== [[Year by Year Changes, Production Numbers, and Cost:]] ===
[[Image:1970DodgeChallengerHemi.jpg|thumb|400px|1970 Hemi Challenger]]
 
  
<!-- replace the above year with the applicable and add more years using the same format, or delete the extras. -->
+
The below is information specific to the individual years of the first version of the Challenger.
<!-- [[Image:insertphotofilehere|thumb|PhotoTitlehere]  insert photofile and title for this year and remove comment code -->
 
  
==== [[Body Styles]] ====
+
==== 1970 Dodge Challenger ====
 +
 
 +
Need Collaboration on a intro for the
 +
year 1970
 +
 
 +
 
 +
===== [[Sub Models]] for 1970 =====
  
==== [[Sub Models]] ====
+
====== [[Challenger T/A]] ======
  
Challenger T/A
 
  
 
  need for some collaboration on the T/A
 
  need for some collaboration on the T/A
 
  (Details, Colors, Production Numbers)
 
  (Details, Colors, Production Numbers)
  
==== [[Production Numbers ]] ====
+
====== [[Challenger R/T]] ======
 +
 
 +
need for some collaboration on the RT
 +
(Details, Colors, Production Numbers)
 +
 
 +
====== [[Challenger SE]] ======
 +
 
 +
need for some collaboration on the SE
 +
(Details, Colors, Production Numbers)
 +
 
 +
===== [[Production Numbers ]] for 1970 =====
  
 
*'''1970''' = '''76,935''' *includes '''2,539''' T/As
 
*'''1970''' = '''76,935''' *includes '''2,539''' T/As
Line 75: Line 108:
 
**Convertible R/T: '''963'''
 
**Convertible R/T: '''963'''
  
==== Available Colors ====
+
===== Available Colors for 1970 =====
  
 
*Light Gold Metallic-FY4,  
 
*Light Gold Metallic-FY4,  
Line 97: Line 130:
 
*Panther Pink-FM3
 
*Panther Pink-FM3
  
==== [[Platform]] ====
+
===== [[Engines]] for 1970 =====
 
 
[[E-Body]]
 
 
 
==== [[Engines]] ====
 
  
 
* C: 225 cu in (3.7 L) Slant 6 I6: 145 bhp   
 
* C: 225 cu in (3.7 L) Slant 6 I6: 145 bhp   
Line 113: Line 142:
 
* R: 426 cu in (7 L) Hemi V8: 425 bhp costing an extra US$1,228 and very few sold. 1970-1971
 
* R: 426 cu in (7 L) Hemi V8: 425 bhp costing an extra US$1,228 and very few sold. 1970-1971
  
 +
===== [[Transmissions]] for 1970 =====
  
==== [[Transmissions]] ====
+
need Collaboration on the available transmissions for 1970
  
==== [[Length]], [[width]], [[height]], [[wheelbase]] ====
+
===== [[Length]], [[width]], [[height]], [[wheelbase]] for 1970 =====
  
 
*Length 191.3 in
 
*Length 191.3 in
Line 123: Line 153:
 
*Wheelbase 110.0 in
 
*Wheelbase 110.0 in
  
=== 1971 ===
+
==== 1971 Dodge Challenger ====
[[Image:71challengerrt.jpg|thumb|400px|1971 Challenger R/T 340]]
+
 
<!-- replace the above year with the applicable and add more years using the same format, or delete the extras. -->
+
Need Collaboration on a intro for the
<!-- [[Image:insertphotofilehere|thumb|400px|PhotoTitlehere] insert photofile and title for this year and remove comment code -->
+
year 1971
 +
 
 +
===== [[Sub Models]] for 1971 =====
  
==== [[Body Styles]] ====
+
====== [[Challenger R/T]] ======
  
==== [[Sub Models]] ====
+
need for some collaboration on the RT
 +
(Details, Colors, Production Numbers)
  
==== [[Production Numbers]] ====
+
===== [[Production Numbers]] for 1971 =====
  
 
*'''1971''' = '''26,299'''
 
*'''1971''' = '''26,299'''
Line 141: Line 174:
 
**Hardtop V8 R/T: '''3,814'''
 
**Hardtop V8 R/T: '''3,814'''
  
==== Available Colors ====
+
===== Available Colors for 1971 =====
  
 
*Light Gunmetal Metallic-GA4,  
 
*Light Gunmetal Metallic-GA4,  
Line 163: Line 196:
 
*Top Banana-FY1
 
*Top Banana-FY1
  
==== [[Platform]] ====
+
===== [[Engines]] for 1971 =====
 
 
[[E-Body]]
 
 
 
==== [[Engines]] ====
 
  
 
* C: 225 cu in (3.7 L) Slant 6 I6: 145 bhp   
 
* C: 225 cu in (3.7 L) Slant 6 I6: 145 bhp   
Line 175: Line 204:
 
* L: 383 cu in (6.3 L) B V8: 290 bhp  and 330 bhp (246 kW) 1970-1971
 
* L: 383 cu in (6.3 L) B V8: 290 bhp  and 330 bhp (246 kW) 1970-1971
 
* N: 383 cu in (6.3 L) B V8: 335 bhp  1970-1971
 
* N: 383 cu in (6.3 L) B V8: 335 bhp  1970-1971
* U: 440 cu in (7.2 L) RB V8: Available in Magnum 4-barrel carbureted form 375 bhp 1970-1971
+
* U: 440 cu in (7.2 L) RB V8: Available in Magnum 4-barrel [[carburetor|carbureted]] form 375 bhp 1970-1971
 
* V: 440 cu in (7.2 L) RB V8 Six-Pack: (3 × 2-barrel carburetors) 390 bhp  1970-1971
 
* V: 440 cu in (7.2 L) RB V8 Six-Pack: (3 × 2-barrel carburetors) 390 bhp  1970-1971
 
* R: 426 cu in (7 L) Hemi V8: 425 bhp costing an extra US$1,228 and very few sold. 1970-1971
 
* R: 426 cu in (7 L) Hemi V8: 425 bhp costing an extra US$1,228 and very few sold. 1970-1971
  
 +
===== [[Transmissions]] for 1971 =====
  
==== [[Transmissions]] ====
+
need Collaboration on the available transmissions for 1971
  
==== [[Length]], [[width]], [[height]], [[wheelbase]] ====
+
===== [[Length]], [[width]], [[height]], [[wheelbase]] for 1971 =====
  
 
*Length 191.3 in
 
*Length 191.3 in
Line 189: Line 219:
 
*Wheelbase 110.0 in
 
*Wheelbase 110.0 in
  
=== 1972 ===
+
==== 1972 Dodge Challenger ====
  
<!-- replace the above year with the applicable and add more years using the same format, or delete the extras. -->
 
<!-- [[Image:insertphotofilehere|thumb|PhotoTitlehere]  insert photofile and title for this year and remove comment code -->
 
  
==== [[Body Styles]] ====
+
Need Collaboration on a intro for the
 +
year 1972
  
==== [[Sub Models]] ====
+
===== [[Sub Models]] for 1972 =====
  
==== [[Production Numbers]] ====
+
===== [[Production Numbers]] for 1972 =====
  
 
*'''1972''' = '''22,919'''
 
*'''1972''' = '''22,919'''
Line 205: Line 234:
 
**Hardtop V8 Rallye: '''8,123'''
 
**Hardtop V8 Rallye: '''8,123'''
  
==== Available Colors ====
+
===== Available Colors for 1972 =====
  
 
*Light Blue-HB1,  
 
*Light Blue-HB1,  
Line 224: Line 253:
 
*Top Banana-FY1
 
*Top Banana-FY1
  
 
+
===== [[Engines]] for 1972 =====
==== [[Platform]] ====
 
 
 
[[E-Body]]
 
 
 
==== [[Engines]] ====
 
  
 
* G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
 
* G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
 
* H: 340 cu in (5.6 L) LA V8: 275 bhp (205 kW) 1970-1973
 
* H: 340 cu in (5.6 L) LA V8: 275 bhp (205 kW) 1970-1973
  
==== [[Transmissions]] ====
+
===== [[Transmissions]] for 1972 =====
 +
 
 +
need Collaboration on the available transmissions for 1972
  
==== [[Length]], [[width]], [[height]], [[wheelbase]] ====
+
===== [[Length]], [[width]], [[height]], [[wheelbase]] for 1972 =====
  
 
*Length 191.3 in
 
*Length 191.3 in
Line 243: Line 269:
 
*Wheelbase 110.0 in
 
*Wheelbase 110.0 in
  
 +
==== 1973 Dodge Challenger ====
  
=== 1973 ===
 
  
<!-- replace the above year with the applicable and add more years using the same format, or delete the extras. -->
 
<!-- [[Image:insertphotofilehere|thumb|PhotoTitlehere]  insert photofile and title for this year and remove comment code -->
 
  
==== [[Body Styles]] ====
+
Need Collaboration on a intro for the
 +
year 1973
  
==== [[Sub Models]] ====
+
===== [[Sub Models]] for 1973 =====
  
==== [[Production Numbers]] ====
+
===== [[Production Numbers]] for 1973 =====
  
 
*'''1973''' = '''27,930'''
 
*'''1973''' = '''27,930'''
 
**Note: All models were V8-powered hardtops
 
**Note: All models were V8-powered hardtops
  
==== Available Colors ====
+
===== Available Colors for 1973 =====
  
 
*Black-TX9,  
 
*Black-TX9,  
Line 277: Line 302:
 
*Light Green Metallic-GF3
 
*Light Green Metallic-GF3
  
==== [[Platform]] ====
+
===== [[Engines]] for 1973 =====
 
 
[[E-Body]]
 
 
 
==== [[Engines]] ====
 
  
 
* G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
 
* G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
 
* H: 340 cu in (5.6 L) LA V8: 275 bhp (205 kW) 1970-1973
 
* H: 340 cu in (5.6 L) LA V8: 275 bhp (205 kW) 1970-1973
  
==== [[Transmissions]] ====
+
===== [[Transmissions]] for 1973 =====
  
==== [[Length]], [[width]], [[height]], [[wheelbase]] ====
+
need Collaboration on the available transmissions for 1973
 +
 
 +
===== [[Length]], [[width]], [[height]], [[wheelbase]] for 1973 =====
  
 
*Length 191.3 in
 
*Length 191.3 in
Line 295: Line 318:
 
*Wheelbase 110.0 in
 
*Wheelbase 110.0 in
  
 +
==== 1974 Dodge Challenger ====
  
=== 1974 ===
 
  
<!-- replace the above year with the applicable and add more years using the same format, or delete the extras. -->
 
<!-- [[Image:insertphotofilehere|thumb|PhotoTitlehere]  insert photofile and title for this year and remove comment code -->
 
  
==== [[Body Styles]] ====
+
Need Collaboration on a intro for the
 +
year 1974
  
==== [[Sub Models]] ====
+
===== [[Sub Models]] for 1974 =====
  
==== [[Production Numbers]] ====
+
===== [[Production Numbers]] for 1974 =====
  
 
*'''1974''' = '''11,354'''
 
*'''1974''' = '''11,354'''
 
**Note: All models were V8-powered hardtops
 
**Note: All models were V8-powered hardtops
  
==== Available Colors ====
+
===== Available Colors for 1974 =====
  
 
*Yellow Blaze-KY5,  
 
*Yellow Blaze-KY5,  
Line 321: Line 343:
 
*Light Blue-HB1
 
*Light Blue-HB1
  
==== [[Platform]] ====
+
===== [[Engines]] for 1974 =====
 
 
[[E-Body]]
 
 
 
==== [[Engines]] ====
 
 
 
  
 
* G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
 
* G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
 
* J: 360 cu in (5.9 L) LA V8: 245 bhp (183 kW) 1974
 
* J: 360 cu in (5.9 L) LA V8: 245 bhp (183 kW) 1974
  
 +
===== [[Transmissions]] for 1974 =====
  
==== [[Transmissions]] ====
+
need Collaboration on the available transmissions for 1974
  
==== [[Length]], [[width]], [[height]], [[wheelbase]] ====
+
==== [[Length]], [[width]], [[height]], [[wheelbase]] for 1974 ====
  
 
*Length 191.3 in
 
*Length 191.3 in
Line 341: Line 359:
 
*Wheelbase 110.0 in
 
*Wheelbase 110.0 in
  
 
+
== 1978 - 1983 Dodge Challenger ==
=== 1978 - 1983 ===
+
{{Template:Needphotos}}
 
 
 
 
 
 
[[Image:78dodgechallengergtcoupe.jpg|thumb|400px|1978 Challenger Brochure]]
 
 
 
 
'''The Forgotten Challengers'''
 
'''The Forgotten Challengers'''
  
 
In 1978, Chrysler partnered up with [[Mitsubishi]] to sell their small coupe sold overseas as the Sapporo through Dodge as the Challenger.  Plymouth sold virtually the same car (with a silver grill instead of the Challenger's black grill, and in different body colors) through its dealers. These cars came with an unusually large (for the era) 2.6 liter 4 cylinder engine. Mitsubishi had pioneered smoothing out the larger displacement 4-cylinder engines with its balanced crank shafts. The Challenger and Plymouth from this era had brisk performance, when compared to other 4-Cylinder Sport Coupes of the same era.
 
In 1978, Chrysler partnered up with [[Mitsubishi]] to sell their small coupe sold overseas as the Sapporo through Dodge as the Challenger.  Plymouth sold virtually the same car (with a silver grill instead of the Challenger's black grill, and in different body colors) through its dealers. These cars came with an unusually large (for the era) 2.6 liter 4 cylinder engine. Mitsubishi had pioneered smoothing out the larger displacement 4-cylinder engines with its balanced crank shafts. The Challenger and Plymouth from this era had brisk performance, when compared to other 4-Cylinder Sport Coupes of the same era.
 
<!-- replace the above year with the applicable and add more years using the same format, or delete the extras. -->
 
<!-- [[Image:insertphotofilehere|thumb|PhotoTitlehere]]  insert photofile and title for this year and remove comment code -->
 
  
 
==== [[Body Styles]] ====
 
==== [[Body Styles]] ====
  
2-Door Sport Coupe
+
The only version of this era Challenger was a 2-Door Sport Coupe
  
==== [[Platform]] ====
+
==== [[Platform]] For 1978 - 1983  Dodge Challenger ====
  
==== [[Engines]] ====
+
==== [[Engines]] 1978 - 1983  Dodge Challenger ====
  
 
* 1.6 L (98 cu in)  
 
* 1.6 L (98 cu in)  
 
* 2.6 L (159 cu in)
 
* 2.6 L (159 cu in)
  
==== [[Transmissions]] ====
+
==== [[Transmissions]] 1978 - 1983  Dodge Challenger ====
  
5-speed Manual
+
* 5-speed Manual
3-speed Automatic
+
* 3-speed Automatic
  
==== [[Length]], [[width]], [[height]], [[wheelbase]] ====
+
==== [[Length]], [[width]], [[height]], [[wheelbase]] 1978 - 1983  Dodge Challenger ====
  
 
178.1 in, 65.9 in, 53 in-53 in.3, 99.6 in
 
178.1 in, 65.9 in, 53 in-53 in.3, 99.6 in
  
 
==== 1978 - 1983 Challenger Related Models ====
 
==== 1978 - 1983 Challenger Related Models ====
[[Plymouth]] [[Sapporo]]
+
 
 +
* [[Plymouth]] [[Sapporo]]
  
 
==== 1978 Challenger ====
 
==== 1978 Challenger ====
 +
{{Template:Underconstruction}}
 +
 +
a little collaborative help is needed for information
 +
specific to this year of Challenger
  
 
===== 1978 Challenger Colors =====
 
===== 1978 Challenger Colors =====
 +
 +
a little collaborative help is needed for colors
 +
available specific to this year of Challenger
  
 
===== 1978 Challenger Production Numbers =====
 
===== 1978 Challenger Production Numbers =====
 +
 +
a little collaborative help is needed for Production
 +
Numbers specific to this year of Challenger
  
 
==== 1979 Challenger ====
 
==== 1979 Challenger ====
 +
 +
 +
 +
a little collaborative help is needed for information
 +
specific to this year of Challenger
  
 
===== 1979 Challenger Colors =====
 
===== 1979 Challenger Colors =====
 +
 +
a little collaborative help is needed for colors
 +
available specific to this year of Challenger
  
 
===== 1979 Challenger Production Numbers =====
 
===== 1979 Challenger Production Numbers =====
 +
 +
a little collaborative help is needed for Production
 +
Numbers specific to this year of Challenger
  
 
==== 1980 Challenger ====
 
==== 1980 Challenger ====
 +
 +
 +
 +
a little collaborative help is needed for information
 +
specific to this year of Challenger
  
 
===== 1980 Challenger Colors =====
 
===== 1980 Challenger Colors =====
 +
 +
a little collaborative help is needed for colors available
 +
specific to this year of Challenger
  
 
===== 1980 Challenger Production Numbers =====
 
===== 1980 Challenger Production Numbers =====
 +
 +
a little collaborative help is needed for Production
 +
Numbers specific to this year of Challenger
  
 
==== 1981 Challenger ====
 
==== 1981 Challenger ====
 +
 +
a little collaborative help is needed for information
 +
specific to this year of Challenger
  
 
===== 1981 Challenger Colors =====
 
===== 1981 Challenger Colors =====
 +
 +
a little collaborative help is needed for colors available
 +
specific to this year of Challenger
  
 
===== 1981 Challenger Production Numbers =====
 
===== 1981 Challenger Production Numbers =====
 +
 +
a little collaborative help is needed for Production
 +
Numbers specific to this year of Challenger
  
 
==== 1982 Challenger ====
 
==== 1982 Challenger ====
 +
 +
 +
 +
a little collaborative help is needed for information
 +
specific to this year of Challenger
  
 
===== 1982 Challenger Colors =====
 
===== 1982 Challenger Colors =====
 +
 +
a little collaborative help is needed for colors available
 +
specific to this year of Challenger
  
 
===== 1982 Challenger Production Numbers =====
 
===== 1982 Challenger Production Numbers =====
 +
 +
a little collaborative help is needed for Production
 +
Numbers specific to this year of Challenger
  
 
==== 1983 Challenger ====
 
==== 1983 Challenger ====
 +
 +
a little collaborative help is needed for information
 +
specific to this year of Challenger
  
 
===== 1983 Challenger Colors =====
 
===== 1983 Challenger Colors =====
 +
 +
a little collaborative help is needed for colors available
 +
specific to this year of Challenger
  
 
===== 1983 Challenger Production Numbers =====
 
===== 1983 Challenger Production Numbers =====
  
 +
a little collaborative help is needed for Production
 +
Numbers specific to this year of Challenger
  
=== 2008 - 2011 ===
+
== 2008 - 2021 Dodge Challenger ==
  
[[Image:2008-dodge-challenger-srt8-1970-1280x960.jpg|thumb|400px|Compare 1970 with 2008 Challenger]]
+
The third generation Challenger started as a carbon fiber bodied Concept car that made the show circuit in 2006. It received so many cries to be made into a production car -- that Dodge accepted the "Challenge" and started to produce the car in 2008 on the[[LC]] platform.
<!-- replace the above year with the applicable and add more years using the same format, or delete the extras. -->
 
<!-- [[Image:insertphotofilehere|thumb|PhotoTitlehere] insert photofile and title for this year and remove comment code -->
 
  
 
==== [[Concept Car]] ====
 
==== [[Concept Car]] ====
  
==== [[Body Styles]] ====
 
  
2- Door Coupe
+
The design of the third generation Challenger is generally credited to automotive designer [[Michael Castiglione]], working out of the [[DaimlerChrysler]]'s [[Pacifica Design Studio]] in Carlsbad, California.
 +
 
 +
Its shape is closely modeled after the iconic shape of the 1970 and 1971 Dodge Challenger, now two of the world's most highly prized collector cars. But it's too easy to dismiss Castiglione's design as a carbon copy of the classic form. It isn't. In fact, the car took a year and a half to design.
 +
 
 +
'''Modern interpretation of a classic'''
 +
<br>
 +
The process of creating the car began 2004. The idea was to develop a hot-looking performance coupe using Chrysler's rear-wheel-drive [[LX]] platform and its Hemi V8. In other words, come up with a coupe version of the Dodge Charger RT.
 +
 
 +
Early Castiglione sketches, the car had a lot of Cuda influences, which made a lot of sense. The 1970 and 1971 [[Plymouth]] [[Barracuda]] was the sister car to the Challenger, and it's the more iconic of the two machines today. But the death of Plymouth in 2001 killed the [[Cuda]] Concept from ever seeing the light of day. Instead the car had to be a Dodge.
 +
 
 +
"I drew over 1,000 cars, 900 of which are in the trash," says Castiglione. Early sketches were all over the map, from cars with cab forward shapes to others with four individual taillights and semicircular grilles like Dodge used on the 1972-'74 Challenger.
 +
 
 +
"Early on, we just tried to capture 'Mopar' in the designs," says Castiglione who beat out two other designers for the job. "We tried to capture the beveled edges that were uniquely Mopar back in the muscle car days. If you look at an old Challenger or Charger, the lines have a snap to them. Once we figured that out, then we got more focused."
 +
 
 +
Once focused on the 1970 Challenger, an example was brought in to the design studio for inspiration. The 383-powered R/T [[convertible]], which was painted in the classic color of Plum Crazy purple, belonged to a friend of a friend, and was chosen because it had the standard twin-scoop hood instead of the optional Shaker scoop. Castiglione had decided to emulate that hood because it was a unique Mopar design.
 +
 
 +
"[[The Shaker]] just isn't unique to Dodge," he says. "Ford and GM also used them back then." It was also a four-speed car, which means it had the iconic pistol-grip shifter. This would later influence Alan Barrington, who designed the concept car's interior.
 +
 
 +
'''Challenger only in your mind's eye'''
 +
<br>
 +
"Instead of merely recreating the 1970 model," says [[Tom Tremont]], vice president of Advanced Vehicle Design, "the designers endeavored to build a Challenger most people see in their mind's eye."
 +
 
 +
That requirement meant varying from the old car's long-hood/short-deck profile was impossible. This caused Castiglione serious problems. The touchdown of the windshield is much farther forward on the modern LX chassis than it is on the old car. This moves the center of the car closer to the front wheels and inherently shortens the front end.
 +
 
 +
He compensated for this by raking the windshield radically compared to the Charger's front glass, and increasing the size of the front overhang to make the hood look longer. He also put an angled cut in the door seam to be sympathetic to the windshield rake, and moved the side mirrors farther back on the doors to fool the eye into seeing a longer hood.
 +
 
 +
Castiglione also had to find a way to incorporate the old car's asymmetrical wheelwell openings and its tucked-in rocker sections, both of which go against conventional modern car design. He achieved the desired effect by widening the front and rear tracks to 64 and 65 inches, which is even wider than the old 1970 model, and moving the rocker panels in. He also successfully reversed the basic proportions of the old car to better reflect DaimlerChrysler's modern design language of a thicker body with a shrunken greenhouse. The result is a very modern-looking coupe that perfectly fits in with Dodge's present model lineup.
 +
 
 +
Details left out include the old car's oversized chrome gas cap, which just didn't look right with the concept car's otherwise missing brightwork, and a modern version of the original Challenger's hood pins.
 +
 
 +
'''Long, low, wide and fast'''
 +
<br>
 +
On February 1, 2005, after nearly a year's work on the Challenger's design, the car would be built into a full-size running concept car for the 2006 Detroit Auto Show. Castiglione's deadline to hand off the full-size clay model and all of his computer data to Metalcrafters was the first week of June 2005.
 +
 
 +
Located in Fountain Valley, California, Metalcrafters built all of DaimlerChrysler's concept cars and needed about six months to build the Challenger, which is made entirely of carbon fiber. The concept car is 197.8 inches long and 78.6 inches wide, the finished car is 2.3 inches shorter and a full 4 inches wider than a four-door Charger. It's also 1.2 inches lower and sits on a 116-inch wheelbase, which is 4 inches shorter than a Charger's wheelbase and 6 inches longer than the wheelbase of a 1970 Challenger.
 +
 
 +
It all rides on massive five-spoke wheels and oversized tires that are literally squeezed up under the body. "We did a lot of wheels that looked like the original rallys," says Castiglione. "But the instant we brought the spokes out to the rims it made the wheels look larger and we wanted the largest wheels possible." He ended up with 20-by-9-inch front and 21-by-10-inch rear wheels wrapped in 255/40R20 front and 265/45R21 specially made Goodyear tires.
 +
 
 +
The paint color was also custom mixed for the car. "It looks heritage," says Castiglione. "But it's not a literal interpretation of Hemi Orange."
 +
 
 +
 
 +
 
 +
Under the hood, however, is some real Hemi Orange. It's on the valve covers of the 425-hp, 6.1-liter V8 that the Challenger Concept borrowed from a Dodge Charger SRT-8. The underhood look is the work of [[John Sodano]], another designer at Pacifica. "This is the kind of car that people will want to look under the hood," Sodano says. "So I drew back to the original Hemis for inspiration."
 +
 
 +
Sodano decided that the inner fenders would be body color like Dodge did back in 1970, and the engine would be cleaned up of any unsightly accessories like an air-conditioning compressor. He also designed all the ducting that directs air from the working hoodscoops into the engine's intake plenum and spec'd out a Flowmaster exhaust with no catalytic converters.
 +
 
 +
The [[Hemi]] is backed by a six-speed manual transmission, and Dodge said the combination is good for 0-60 mph in 4.5 seconds, a quarter-mile run in 13 seconds flat and a top speed of 174 mph.
 +
 
 +
 
 +
 
 +
'''Familiar, but modern inside'''
 +
<br>
 +
Eight weeks before the design went to Metalcrafters, Barrington, 31, got to work on the interior. "When you ask people what they remember about the old Challenger's interior," says Barrington, "it's always the pistol-grip shifter, three-spoke steering wheel, the bank of round gauges and the vailstyle pleat upholstery." After 50 different designs, Barrington's final iteration incorporates all that stuff, yet it's as modern as can be.
 +
 
 +
A good example of his ability to make the old new again is the car's [[pistol-grip shifter]]. In the old car it had an old Western form to it, grab the new one, however, and it feels more like a Glock or some other modern firearm.
 +
 
 +
"I wanted a coherent cohesive design that looked like the interior and exterior of the car had the same author," he says. "That's why the faceted trapezoidal form of the instrument panel and the doorpanels mirrors the shape of the grille and the racetrack around the taillights.
 +
 
 +
"I also used [[brightwork]] to highlight the areas the driver's attention should be: the shifter, gauges, etc.," Barrington adds. The rest of the interior falls away to darkness. On the old car the designers used wood in a similar way.
 +
 
 +
To form the [[gauge cluste]]r, Barrington incorporated elements of the old rally pack of gauges and the standard cluster. There are fewer and larger dials than the old standard setup had, but the dial on the far left is the largest as it used to be on the standard setup. When designing the Challenger's gauges, Barrington also drew influence from a bare engine block. "I designed the gauges' holes to appear as if you are looking down into the engine cylinders with the head off," he relates.
 +
 
 +
He also filled the largest dial with an on-board computer that can calculate the performance numbers like top overall speed, quarter-mile time and top speed for each gear.
 +
 
 +
Further cool touches include the toggle switches, the bold mechanical-looking radio and climate controls and the thick three-spoke wheel with its circular hub and pierced silver spokes. It evokes the original car's "Tuff" wheel as does the steering column ribbing. The seats are similar in shape to the buckets you get in a [[Charger SRT-8]], only Barrington had them covered in unique black upholstery with horizontal pleats. The upholstery in a 1970 Challenger featured vertical pleats.
 +
 
 +
==== [[Body Styles]] of the 2008 - 2011 Dodge Challenger ====
 +
 
 +
 
 +
 
 +
All 2008 up versions of the Dodge Challenger are a 2-Door [[Coupe]]
  
==== [[Platform]] ====
+
==== [[Platform]] of the 2008 - 2011 Dodge Challenger ====
  
 
[[LC-Body]]
 
[[LC-Body]]
  
==== [[Related Models]] ====
+
==== [[Related Models]] to the 2008 - 2011 Dodge Challenger ====
  
 
* [[Chrysler]] [[300]]
 
* [[Chrysler]] [[300]]
Line 437: Line 575:
 
* Dodge [[Magnum]]
 
* Dodge [[Magnum]]
  
==== [[Engines]] ====
+
==== [[Engines]] of the 2008 - 2011 Dodge Challenger ====
  
 
* 6.1 L (370 cu in) HEMI V8
 
* 6.1 L (370 cu in) HEMI V8
Line 443: Line 581:
 
* 3.5 L (214 cu in) SOHC V6 (2009 & later)
 
* 3.5 L (214 cu in) SOHC V6 (2009 & later)
  
==== [[Transmissions]] ====
+
==== [[Transmissions]] of the 2008 - 2011 Dodge Challenger ====
  
 
* 4-speed Automatic (2009 & later V6)
 
* 4-speed Automatic (2009 & later V6)
Line 449: Line 587:
 
* 6-speed Manual (2009 & later)
 
* 6-speed Manual (2009 & later)
  
==== [[Length]], [[width]], [[height]], [[wheelbase]] ====
+
==== [[Length]], [[width]], [[height]], [[wheelbase]] of the 2008 - 2011 Dodge Challenger ====
  
 
* Length 197.7 in
 
* Length 197.7 in
Line 457: Line 595:
  
  
 +
==== 2008 Challenger ====
 +
 +
On December 3, 2007, Chrysler started accepting deposits for the 3rd Dodge Challenger, which debuted on February 6, 2008 at the Chicago Auto Show and Philadelphia International Auto Show simultaneously. With a [[List Price]] of $40,095US, the 2-door coupe shared a common design with the 1st Challenger, albeit being significantly longer and taller. The Challenger chassis is a shorter wheelbase version of the LX platform that underpinned the Dodge Charger, Dodge Magnum, and the Chrysler 300. The LX platform was itself adapted from the Mercedes E Class.
 +
 +
All (7119) 2008 models were SRT8s and equipped with the 6.1L Hemi and a 5-speed AutoStick automatic transmission. The entire 2008 US run of 6,400 cars were pre-sold (many marked up far above the MSRP).
 +
 +
Production started on May 8, 2008.
 +
 +
Chrysler Canada offered another 670+ SRTs uniquely badged as the Challenger 500, exclusively for Canadian Dodge dealers. Chrysler of Mexico offered 100 of these cars with a 6.1 liter V8 and 425 brake horsepower to its dealers.
 +
 +
At the Barrett-Jackson Auction, Chrysler auctioned off two 2008 SRT8s for charity with car #1 selling for $400,000.00 to benefit the notMYkid non-profit organization, and a "B5" Blue #43 car received a winning bid of $228,143.43 -- with the proceeds going to Victory Junction Gang Camp.
 +
 +
Production of the limited edition 2008 SRT/8s ended in July 2008
  
==== 2008 ====
+
===== Colors Available for the 2008 Challenger =====
  
===== Colors Available =====
+
a little collaborative help is needed for colors
 +
available specific to this year of Challenger
  
===== Production Number Breakdown =====
+
===== Production Number Breakdown for the 2008 Challenger =====
  
===== SE =====
+
* Calendar Year in the USA were 17,423
 +
* 2008 Model Year Sales were 7119
 +
 
 +
==== 2009 Challenger ====
  
===== R/T =====
 
  
===== SRT-8 =====
 
  
===== Special Packages =====
+
Production of the expanded 2009 line-up started in early August of 2008.
  
 +
Chrysler debuted the full Dodge Challenger line for 2009, with three different US trims - SE, R/T, SRT8; and the SXT for the Canadian Market.
  
 +
In addition to the SRT8, which remained unchanged except for the optional 6 speed manual, the line-up included the SE and SXT which offered the 250 HP 3.5 V6, and the R/T which had a 370 hp and 398 lb·ft torque 5.7 liter Hemi when coupled with the 5 speed automatic, and 375 hp (280 kW) and 404 lb·ft (548 N·m) when matched with the same Tremec 6 speed manual stick as the SRT8.
  
 +
===== Colors Available for the 2009 Challenger =====
  
==== 2009 ====
+
a little collaborative help is needed for colors
 +
available specific to this year of Challenger
  
===== Colors Available =====
+
===== Production Number Breakdown for the 2009 Challenger =====
  
===== Production Number Breakdown =====
+
*US Calendar Year sales was 25,852
  
 
===== SE =====
 
===== SE =====
Line 489: Line 646:
 
===== Special Packages =====
 
===== Special Packages =====
  
 +
There have been a number of Limited Production
 +
Models of the 2009 version of the Challenger
 +
We are looking for a little help (collaboration)
 +
with listing and describing these Limited Productions
 +
 +
 +
==== 2010 Challenger ====
 +
 +
need collaboration on the Challenger for 2010
  
 +
===== Colors Available for the 2010 Challenger =====
  
==== 2010 ====
+
a little collaborative help is needed for colors
 +
available specific to this year of Challenger
  
===== Colors Available =====
+
===== Production Number Breakdown for the 2010 Challenger =====
  
===== Production Number Breakdown =====
+
a little collaborative help is needed for Production
 +
Numbers specific to this year of Challenger
  
 
===== SE =====
 
===== SE =====
Line 505: Line 674:
 
===== Special Packages =====
 
===== Special Packages =====
  
 +
There have been a number of Limited Production
 +
Models of the 2010 version of the Challenger
 +
We are looking for a little help (collaboration)
 +
with listing and describing these Limited Productions
 +
 +
==== 2011 Challenger ====
  
 +
need collaboration on the Challenger for 2011
  
==== 2011 ====
+
===== Colors Available for the 2011 Challenger =====
  
===== Colors Available =====
+
a little collaborative help is needed for colors
 +
available specific to this year of Challenger
  
===== Production Number Breakdown =====
+
===== Production Number Breakdown for the 2011 Challenger =====
 +
 
 +
a little collaborative help is needed for Production
 +
Numbers specific to this year of Challenger
  
 
===== SE =====
 
===== SE =====
 +
 +
Standard Equipment on the 2011 Challenger SE includes the 3.6L Pentastar V-6 that produces 305 horsepower.
  
 
===== R/T =====
 
===== R/T =====
 +
 +
For 2011, the R/T's 376 horsepower 5.7L [[Hemi]] will gain [[cold-air induction]].
  
 
===== SRT-8 =====
 
===== SRT-8 =====
Line 521: Line 705:
 
===== Special Packages =====
 
===== Special Packages =====
  
 +
There have been a number of Limited Production
 +
Models of the 2011 version of the Challenger
 +
We are looking for a little help (collaboration)
 +
with listing and describing these Limited Productions
  
 +
For the year 2011, there will be 1,492 Inaugural Edition Challenger SRT8 392s built.  These cars are available in white with blue stripes or blue with white stripes only.  Of the 1,492 cars to be built, 1,100 will be for the United States and the remaining 392 for Canada.
  
 
==== [[SRT-10 Concept]] ====
 
==== [[SRT-10 Concept]] ====
Line 527: Line 716:
  
  
==== [[Drag Pack]] ====
+
==== [[Drag Pak]] ====
[[Image:Doug Duell Challenger.jpg|thumb|400px|Doug Duell and his S/S Challenger]]
 
  
  
===== 2009 Drag Packs =====
 
  
need some help here to tell of the
 
number produced, engines and
 
transmissions offered etc...
 
  
====== Current 2009 Roster ======
+
===== 2009 Drag Paks =====
  
The below is a roster of owners of the 2009 Drag Packs. Please update any verified changes my adding an entry for that number under the previous owner, without removing the previous owner.
+
'''The Below is the text to the original Press Release from Mopar Performance'''
  
<br>1. Don Garlits 6.1 A/SA
+
Yearning to relive the muscle era is passé. We're ready to relive the days of high-horsepower super-stock specials being built at the factory. Forty years after Chrysler built its original drag-track specials, the 2009 Dodge Challenger Drag Race Package allows us to do just that.
<br>2. Larry Griffith
 
<br>3. Randy Warford
 
<br>4.
 
<br>5.
 
<br>6. Irvin Johns
 
<br>7. Jim Pancake
 
<br>8.
 
<br>9. At Donato Engineering being prepared for owner in Sweden 6.1 Manual Black RaceJunk
 
<br>10.
 
<br>11. Fred Hanson 6.1
 
<br>12.
 
<br>13. PB Candies 6.1
 
<br>14. Jeg Couglin Jr.
 
<br>15. Al Carpiniello 6.1 Auto
 
<br>16. Jeff Teuton 5.9 Magnum
 
<br>17.
 
<br>18. Scott Justo
 
<br>19. Derek Atwill (6.1) Ottawa Ontario
 
<br>20. Mel Warford Current Status
 
<br>21. Mike Booker
 
<br>22. Chuck Lofgren 6.1
 
<br>23. At Donato Engineering being prepared for owner in Sweden
 
<br>24. David Wertman 6.1 Auto A/SA
 
<br>25. Tom Lee 6.1
 
<br>26. Larry Curtis 6.1
 
<br>27.
 
<br>28. On Racing Junk 6.1 Manual
 
<br>29. Tom Gaynor 6.1
 
<br>30. John McLeod
 
<br>31.
 
<br>32. Al Smyth 6.1
 
<br>33.
 
<br>34.
 
<br>35. Roy/Allan Johnson 6.1 Auto
 
<br>36.
 
<br>37.
 
<br>38.
 
<br>39. Mike Wagner 5.7 Manual
 
<br>40. Denny Bairel 5.7 6-speed
 
<br>41.
 
<br>42. Dave Schultz 6.1 6-Speed Old Hippie
 
<br>43. Mack Reeves 6.1 MoparMack
 
<br>44.
 
<br>45.
 
<br>46. Alex Cortezzo 6.1 A/SA
 
<br>47. J.C. Beattie Jr
 
<br>48. John Overby 6.1 Auto
 
<br>49.
 
<br>50.
 
<br>51.
 
<br>52. Jeff and Sandra Hull 6.1 6-speed WV
 
<br>53.
 
<br>54.
 
<br>55.
 
<br>56. Jerry Hatch ME 6.1 Stick (A/SA)
 
<br>57.
 
<br>58. TBA******************* PA (6.1)
 
<br>59.
 
<br>60.
 
<br>61.
 
<br>62. Dennis Radford (6.1) Oregon
 
<br>63. Glen Lange, Indiana
 
<br>64. Peter Ash
 
<br>65. Bucky Hess
 
<br>66.
 
<br>67.
 
<br>68.
 
<br>69.
 
<br>70.
 
<br>71.
 
<br>72.
 
<br>73.
 
<br>74.
 
<br>75.
 
<br>76.
 
<br>77.
 
<br>78.
 
<br>79.
 
<br>80.
 
<br>81.
 
<br>82.
 
<br>83.
 
<br>84.
 
<br>85.
 
<br>86.
 
<br>87.
 
<br>88. Tom Johns (6.1) Alaska.
 
<br>89.
 
<br>90.
 
<br>91.
 
<br>92.
 
<br>93.
 
<br>94.
 
<br>95. (6.1) Marcelus Grace LA.
 
<br>96.
 
<br>97.
 
<br>98. (6.1) Buckner Racing Texas
 
<br>99.
 
<br>100. Doug Duell
 
  
Reference for 2009 Roster: http://www.moparstyle.com/forums/2008-up-challengers-se-rt-srt8/9364-challenger-drag-pack-roster.html
+
While vehicle technology has changed tremendously over the past forty years, the premise behind the Drag Race Package cars hasn't: pack plenty of power into a car while stripping out the portly non-essentials. Given the 4140-lb curb weight of the 2008 Challenger SRT8, there was plenty of material for engineers to strip.
  
 +
Starting with a stock Challenger body-in-white, Mopar's engineers ripped out nearly 1000 lbs of equipment deemed unnecessary for the track. Although the Drag Pack cars will roll down the same Brampton, Ontario, assembly line as the street cars, these models are spared the addition of body sealer, sound deadening, a ventilation system, airbags, and rear seats. If that wasn't enough, Mopar removed the windshield wiper assembly, side- and rear-impact beams - and subsequently, any chance the car can be DOT-certified for the street. As a result, the Drag Race Package car weighs in at approximately 1000 lbs lighter than an SRT8.
  
 +
While those extra parts remain in Chrysler's parts bins, the Challenger Drag Race Package does gain some new equipment. Included with each package car is a new composite lift-off hood (yes; the scoop is functional), polycarbonate windows, manual rack-and-pinion steering, a lightweight brake system and a good old-fashioned cable throttle linkage. Mopar also modified the Challenger's wheelbase, shortening it a half inch to 116 inches, and pushed the engine mounts rearward for better weight distribution.
  
===== 2010 Drag Pack=====
+
Those solid mounts will hold one of three available engines: a 5.7-liter or 6.1-liter HEMI V-8, or a 360 cubic-inch 'Magnum Wedge' V-8, coupled to either an automatic or manual transmission. Although performance numbers haven't yet been released, a typical 360 crate motor produces anywhere between 325 and 395 hp; we'd imagine the 5.7- and 6.1-liter motors will crank out even more power than their street versions, which are rated at 375 hp and 425 hp, respectively.
  
need some help here to tell of the number produced, engines and transmissions offered etc...
+
In order to qualify the Challenger Drag Race Package car to run in NHRA's Comp, Super Stock and Stock classes, Dodge plans to build at least 100 examples for customers and racers alike. Expect pricing to run in the low- to mid-$30,000s - approximately the same as a stock Challenger SRT8.
  
====== Current 2010 Roster ======
 
  
The below is a roster of owners of the 2010 Drag Packs. Please update any verified changes my adding an entry for that number under the previous owner, without removing the previous owner
+
===== 2010 Drag Pak=====
  
<br>1.  
+
The changes made to the 2010 Drag Pak Challengers are Strange front brakes instead of Mark Williams, the master cylinder is and was a Strange unit.
<br>2.  
+
The rear suspension cradle is now a trailer axle instead of the stock independent rear suspension the racer would be replacing anyway.
<br>3.  
+
The wheels are white trailer wheels instead of silver/gray. They are trailer wheel/tires for transport only.
<br>4.
+
The rear trunk has the cylinders so you don't have to hold it open with a stick. The 2009s had no cylinders installed and we bought them from the dealer and installed them on the cars we built.
<br>5.
+
The sheet metal cover to go over the opening above the rear suspension is not welded in to allow the chassis builder to have access to the trunk area before the cover is welded in place.
<br>6.
+
The seats are aftermarket and look a lot like the Viper seats that came in the 2009s. There are no other noticable changes on the 2010s.  
<br>7.
 
<br>8.
 
<br>9.
 
<br>10.
 
<br>11.  
 
<br>12.
 
<br>13.  
 
<br>14.  
 
<br>15.  
 
<br>16.
 
<br>17.
 
<br>18.
 
<br>19.
 
<br>20.
 
<br>21.
 
<br>22.
 
<br>23.
 
<br>24.
 
<br>25.
 
<br>26.
 
<br>27.
 
<br>28.
 
<br>29.
 
<br>30.
 
<br>31.
 
<br>32.
 
<br>33.
 
<br>34.
 
<br>35.
 
<br>36.
 
<br>37.
 
<br>38.
 
<br>39.
 
<br>40.
 
<br>41.
 
<br>42.
 
<br>43.
 
<br>44.
 
<br>45.
 
<br>46.
 
<br>47.
 
<br>48.
 
<br>49.
 
<br>50.
 
  
 +
 +
 +
===== 2011 V-10 Drag Pak=====
 +
 +
 +
 +
The race-only V-10 powered rear-wheel drive 2011 Mopar Challenger Drag Pak features an 8.4-liter 512 cubic-inch engine with a 2-speed automatic transmission. Mopar will showcased its new drag car at the Dodge Viper Owner’s Invitational in Salt Lake City. 
 +
 +
“With the introduction of our new 2011 Mopar Challenger Drag Pak, Mopar will be the only place to get a factory-built V-10-powered race-ready drag car,” said Pietro Gorlier, President and CEO of Mopar, Chrysler Group’s service, parts and customer-care brand.  “Mopar’s new Challenger Drag Pak is a race rocket that will appeal to racers, collectors, dealers, and Dodge Viper owners.”
 +
 +
Based on the 2011 Dodge Challenger and finished in a Stock Eliminator and Super Stock configuration, the 2011 Mopar Challenger V-10 Drag Pak is the first and only 500-plus cubic-inch V-10 drag-race package car.  The car features competition wheels and tires, a Mopar solid rear axle with performance gear ratio, a 2-speed drag race transmission with integrated roll control, a complete competition fuel system with fuel cell, and a complete interior with gauge package.
 +
 +
The Mopar Challenger V-10 Drag Pak features a Bright White paint scheme with color options.  The Manufacturer’s Suggested Retail Price (MSRP) is $85,512
 +
 +
Mopar offers three options with this vehicle.  First, the Competition Package includes an eight-point roll cage, six-point safety harness and a mesh window net (MSRP: $7,950, part number P5155820).  Second, a Mopar logo body wrap (MSRP: $950, part number P5155892) and a range of body colors (MSRP: $6,800, part number P5155893).  With the Competition Package, the car is ready to go down the drag strip.
 +
 +
2011 Mopar Challenger V-10 Drag Pak Highlights
 +
 +
* Identification plate with unique serial number sequence
 +
* Primed and painted body, color options available
 +
* 512 cid V-10 engine
 +
* Unique engine calibration
 +
* 2-speed automatic transmission with shift assembly and built-in roll control
 +
* Special body-in-white modified for drag racing
 +
** No windshield wiper assembly
 +
** No HVAC system (includes block off plates)
 +
** No rear seats
 +
** No power-steering system
 +
** No underbody heat shields
 +
** Complete fuel cell assembly
 +
** Race headers with collectors
 +
** Modified tunnel for transmission clearance and one-piece drive shaft
 +
** Raised floor above differential for solid-axle conversion clearance
 +
* Polycarbonate door windows
 +
* Smart-glass door window system
 +
* Solid engine mounts
 +
* Mopar solid rear axle
 +
* Lightweight seats to accommodate 6-point harness
 +
* Special modified K-member with drop-out crossmember
 +
* Lightweight drag-race only front brake assembly
 +
* Manual rack-and-pinion steering
 +
* Front chin spoiler
 +
* Lightweight cooling module with electric fan
 +
* Lightweight instrument panel assembly
 +
* Special cable-operated decklid release
 +
* Special cable-operated throttle pedal and linkage
 +
* Race-style wheels and tires
 +
 +
 +
==== Challenger Hell Cat ====
 +
 +
need some work done here
 +
 +
==== Challenger Demon ====
 +
For 2018, Dodge made 3,300 (3,000 for the US and 300 for Canada) serialized SRT Challenger Demons.
 +
 +
Power was sourced from a supercharged 6.2-liter Hemi V8 producing 808 horsepower and 717 lb-ft of torque. With this setup, the Dodge Demon will rocket from 0-62 mph in just 2.3 seconds and do the quarter-mile in 9.65 seconds at 140 mph, which made it the fastest production car in the world at the time.
  
 
== Featured in Movies or TV Shows ==
 
== Featured in Movies or TV Shows ==
Line 711: Line 810:
 
=== Vanishing Point ===
 
=== Vanishing Point ===
  
== [[Wiki Topic References:]] ==
+
== [[Magazine References:]] ==
<!-- Cite some references to back up what you write or with more information on the subject Precede with a *, which is a Bullet in Wiki code -->
 
 
 
* [http://en.wikipedia.org/wiki/Dodge_Challenger Wikipedia]
 
  
== [[Magazine References:]] ==
 
 
<!-- List any magazine features of this topic with the Magazine Title, Issue, and pages. Precede with a *, which is a Bullet in Wiki code -->
 
<!-- List any magazine features of this topic with the Magazine Title, Issue, and pages. Precede with a *, which is a Bullet in Wiki code -->
  
 +
*  [[Mopar Action]]  February 2011  pages 30-35  ''It's A Draw''
 +
*  Hemmings Muscle Machines February 2011 page 10 ''A New Challenge(r)''
 +
*  Mopar Action April 2011 pages 24-29, 94-96 ''Meeting the Challenge''
  
 +
== External Links & Wiki Topic References ==
  
== [[External Links]] ==
 
 
<!-- Appropriate -- not spamming or pimping. Precede with a *, which is a Bullet in Wiki code -->
 
<!-- Appropriate -- not spamming or pimping. Precede with a *, which is a Bullet in Wiki code -->
 
* [http://www.moparstyle.com/forums/forumdisplay.php?f=21 MoparStyle E-Body Forum]
 
* [http://www.moparstyle.com/forums/forumdisplay.php?f=21 MoparStyle E-Body Forum]
 
* [http://www.moparstyle.com/forums/forumdisplay.php?f=26 MoparStyle LX/LY Forum]
 
* [http://www.moparstyle.com/forums/forumdisplay.php?f=26 MoparStyle LX/LY Forum]
 
* [http://www.forebodiesonly.com For E Bodies Only]
 
* [http://www.forebodiesonly.com For E Bodies Only]
 +
* [http://www.moparstyle.com/2010/10/v10-challenger-drag-pack-for-2011/ V-10 Challenger Drag Pack]
 +
* [http://www.dragpakregistry.com/ Drag Pak Registry]
 +
* [http://classracer.com/classforum/showthread.php?t=22219&highlight=drag+pack+owners+list Class Racer Drag Pak Thread]
 +
* [http://www.insideline.com/dodge/challenger/2008/dodge-challenger-concept.html Interview with Challenger Designer]
 +
* [http://en.wikipedia.org/wiki/Dodge_Challenger Wikipedia]
 +
* [http://www.motortrend.com/future/concept_cars/112_0608_dodge_challenger_concept/index.html Motor Trend]
 +
* [https://carbuzz.com/news/this-dodge-challenger-srt-demon-has-a-very-special-history Car Buzz]
 +
{{Template:BottomWikiHippieAds}}
 +
  
[[Category:Models|Challenger]]
+
[[Category:Dodge|Dodge Challenger]]
[[Category:Dodge|Challenger]]
+
[[Category:Underconstruction]] <!-- Remove from this category once Wiki is more than 50% complete -->
 +
[[Category:Needphotos]]

Latest revision as of 20:23, 9 May 2023





Discussion.png
If you have information, corrections or reference links that could improve this Wiki, but are uncomfortable with editing in the markup language - you can click the Discussion Tab above and freehand type your information. An editor usually checks the discussion prior to editing the Wiki.


Vanishing Point Challenger
1970 Hemi Challenger
Challenger T/A in Panther Pink
1971 Challenger R/T
1972 Challenger Rallye
1973 Challenger
1974 Challenger
1978 Challenger Brochure
1979 Challenger Brochure
1980 Challenger Brochure
1982 Challenger Brochure
Challenger Concept
Challenger Concept
Challenger Concept
Challenger Concept
Challenger Concept
Compare 1970 with 2008 Challenger
Old Hippie's Challenger RT with Custom Paint
2011 Drag Pak Exterior
2011 V-10 Drag Pack Interior
2011 V-10 Drag Pack Engine
2011 V-10 Drag Pack Trunk
Doug Duell and his S/S Challenger


Contents

Background:

While Plymouth was one of the first Makes to introduce a Pony Car with its 1964 introduction of the Barracuda, its sister division Dodge, had to wait until 1970 for its first Pony Car -- the Challenger. While both the Dodge and Plymouth Pony Cars of 1970-1974 were E-Bodies, the Challenger had a wheelbase 2" longer, mostly for it to compete with the more luxurious Mercury Cougar.

From 1978 to 1983, Dodge sold a version of the 4-cylinder Mitsubishi Plymouth Sapporo through its dealers as the Challenger. The main difference being the colors offered by each of the divisions, and the Sapporo having a Silver colored plastic grill while the Challenger had a black colored plastic grill.

With Pony Cars making a come back a few years ago, in 2008 Dodge brought back the Challenger, after a 34 year absence as an American Pony car. Like Ford with the Mustang, and Chevrolet with the Camaro -- the Challenger has a retro look to it, having a close resemblance to the Challenger of the early 70s.

1970 - 1974 Dodge Challenger

Model Predecessor

The Challenger is the first and only Pony Car for Dodge

Model Successor

The Challenger is the first and only Pony Car for Dodge

Export Versions

The export versions were basically the same as the domestic version. For a brief period they were sold in France through Simca, and a version was assembled in Switzerland to Swiss standard by AMAG. Both version are very rare today.

1970 - 1974 Challenger Related Models

Competition

  • Ford Mustang
  • Chevrolet Camaro
  • Pontiac Firebird
  • Mercury Cougar
  • AMC Javelin

Platform

All of the first generation Dodge Challengers were on the 1970-1974 E-Body, which was a modified version of the B-Body -- as used exclusively for the 197-1974 Plymouth Barracuda/Cuda and Dodge Challenger.

Year by Year Changes, Production Numbers, and Cost:

The below is information specific to the individual years of the first version of the Challenger.

1970 Dodge Challenger

Need Collaboration on a intro for the
year 1970


Sub Models for 1970
Challenger T/A
need for some collaboration on the T/A
(Details, Colors, Production Numbers)
Challenger R/T
need for some collaboration on the RT
(Details, Colors, Production Numbers)
Challenger SE
need for some collaboration on the SE
(Details, Colors, Production Numbers)
Production Numbers for 1970
  • 1970 = 76,935 *includes 2,539 T/As
    • Hardtop I6: 9,929
    • Hardtop V8:. 39,350*
    • Sports hardtop I6: 350
    • Sports hardtop V8: 5,873
    • Convertible I6: 378
    • Convertible V8: 2,543
    • Hardtop R/T: 13,796
    • Special Edition hardtop R/T: 3,753
    • Convertible R/T: 963
Available Colors for 1970
  • Light Gold Metallic-FY4,
  • Plum Crazy (purple)-FC7,
  • Sublime (green)-FJ5,
  • Go-Mango(orange)-EK2,
  • Hemi Orange-EV2,
  • Banana (yellow)-FY1,
  • Light Blue Metallic-EB3,
  • Bright Blue Metallic-EB5,
  • Dark Blue Metallic-EB7,
  • Rallye Red-FE5,
  • Light Green Metallic-FF4,
  • Dark Green Metallic-EF8,
  • Dark Burnt Orange-FK5,
  • Beige-BL1,
  • Dark Tan Metallic-FT6,
  • White-EW1,
  • Black-TX9,
  • Cream-DY3,
  • Panther Pink-FM3
Engines for 1970
  • C: 225 cu in (3.7 L) Slant 6 I6: 145 bhp
  • G: 318 cu in (5.2 L) LA V8: 230 bhp
  • H: 340 cu in (5.6 L) LA V8: 275 bhp
  • J: 340 cu in (5.6 L) LA V8 Six-Pack: 290 bhp 1970 *T/A ONLY
  • L: 383 cu in (6.3 L) B V8: 290 bhp and 330 bhp (246 kW) 1970-1971
  • N: 383 cu in (6.3 L) B V8: 335 bhp 1970-1971
  • U: 440 cu in (7.2 L) RB V8: Available in Magnum 4-barrel carbureted form 375 bhp 1970-1971
  • V: 440 cu in (7.2 L) RB V8 Six-Pack: (3 × 2-barrel carburetors) 390 bhp 1970-1971
  • R: 426 cu in (7 L) Hemi V8: 425 bhp costing an extra US$1,228 and very few sold. 1970-1971
Transmissions for 1970
need Collaboration on the available transmissions for 1970
Length, width, height, wheelbase for 1970
  • Length 191.3 in
  • Width 76.1 in
  • Height 50.9 in
  • Wheelbase 110.0 in

1971 Dodge Challenger

Need Collaboration on a intro for the
year 1971
Sub Models for 1971
Challenger R/T
need for some collaboration on the RT
(Details, Colors, Production Numbers)
Production Numbers for 1971
  • 1971 = 26,299
    • Hardtop I6: 1,672
    • Hardtop V8: 18,956
    • Convertible I6: 83
    • Convertible V8: 1,774
    • Hardtop V8 R/T: 3,814
Available Colors for 1971
  • Light Gunmetal Metallic-GA4,
  • Light Blue Metallic-GB2,
  • Bright Blue Metallic-GB5,
  • Dark Blue Metallic-GB7,
  • Dark Green Metallic-GF7,
  • Light Green Metallic-GF3,
  • Gold Metallic-GY8,
  • Dark Gold Metallic-GY9,
  • Dark Bronze Metallic-GK6,
  • Tan Metallic-GT5,
  • Bright Red-FE5,
  • Bright White-GW3,
  • Black-TX9,
  • Butterscotch-EL5,
  • Citron Yella-GY3,
  • Hemi Orange-EV2,
  • Green Go-FJ6,
  • Plum Crazy-FC7,
  • Top Banana-FY1
Engines for 1971
  • C: 225 cu in (3.7 L) Slant 6 I6: 145 bhp
  • G: 318 cu in (5.2 L) LA V8: 230 bhp
  • H: 340 cu in (5.6 L) LA V8: 275 bhp
  • J: 340 cu in (5.6 L) LA V8 Six-Pack: 290 bhp 1970 *T/A ONLY
  • L: 383 cu in (6.3 L) B V8: 290 bhp and 330 bhp (246 kW) 1970-1971
  • N: 383 cu in (6.3 L) B V8: 335 bhp 1970-1971
  • U: 440 cu in (7.2 L) RB V8: Available in Magnum 4-barrel carbureted form 375 bhp 1970-1971
  • V: 440 cu in (7.2 L) RB V8 Six-Pack: (3 × 2-barrel carburetors) 390 bhp 1970-1971
  • R: 426 cu in (7 L) Hemi V8: 425 bhp costing an extra US$1,228 and very few sold. 1970-1971
Transmissions for 1971
need Collaboration on the available transmissions for 1971
Length, width, height, wheelbase for 1971
  • Length 191.3 in
  • Width 76.1 in
  • Height 50.9 in
  • Wheelbase 110.0 in

1972 Dodge Challenger

Need Collaboration on a intro for the
year 1972
Sub Models for 1972
Production Numbers for 1972
  • 1972 = 22,919
    • Hardtop I6: 842
    • Hardtop V8: 15,175
    • Hardtop V8 Rallye: 8,123
Available Colors for 1972
  • Light Blue-HB1,
  • Bright Blue Metallic-HB5,
  • Bright Red-FE5,
  • Light Green Metallic-GF3,
  • Dark Green Metallic-GF7,
  • Eggshell White-GW1, Black-TX9,
  • Honeydew-GY4,
  • Light Gold-GY5,
  • Gold Metallic-GY8,
  • Dark Gold Metallic-GY9,
  • Dark Tan Metallic-GT8,
  • Light Gunmetal Metallic-GA4,
  • Medium Tan Metallic-GA4,
  • Super Blue-GB3,
  • Hemi Orange-EV2,
  • Top Banana-FY1
Engines for 1972
  • G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
  • H: 340 cu in (5.6 L) LA V8: 275 bhp (205 kW) 1970-1973
Transmissions for 1972
need Collaboration on the available transmissions for 1972
Length, width, height, wheelbase for 1972
  • Length 191.3 in
  • Width 76.1 in
  • Height 50.9 in
  • Wheelbase 110.0 in

1973 Dodge Challenger

Need Collaboration on a intro for the
year 1973
Sub Models for 1973
Production Numbers for 1973
  • 1973 = 27,930
    • Note: All models were V8-powered hardtops
Available Colors for 1973
  • Black-TX9,
  • Dark Silver Metallic-JA5,
  • Eggshell White-EW1,
  • Parchment-HL4,
  • Light Gold-JY3,
  • Dark Gold Metallic-JY9,
  • Gold Metallic-JY6,
  • Bronze Metallic-GK6,
  • Pale Green-JF1,
  • Dark Green Metallic-JF8,
  • Light Blue-HB1,
  • Super Blue-TB3,
  • Bright Blue Metallic-GB5,
  • Bright Red-FE5,
  • Top Banana-FY1,
  • Light Green Metallic-GF3
Engines for 1973
  • G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
  • H: 340 cu in (5.6 L) LA V8: 275 bhp (205 kW) 1970-1973
Transmissions for 1973
need Collaboration on the available transmissions for 1973
Length, width, height, wheelbase for 1973
  • Length 191.3 in
  • Width 76.1 in
  • Height 50.9 in
  • Wheelbase 110.0 in

1974 Dodge Challenger

Need Collaboration on a intro for the
year 1974
Sub Models for 1974
Production Numbers for 1974
  • 1974 = 11,354
    • Note: All models were V8-powered hardtops
Available Colors for 1974
  • Yellow Blaze-KY5,
  • Golden Fawn-KY4,
  • Parchment-HL4,
  • Bright Red-FE5,
  • Deep Sherwood Metallic (Green)-KG8,
  • Eggshell White-EW1,
  • Black-TX9,
  • Light Blue-HB1
Engines for 1974
  • G: 318 cu in (5.2 L) LA V8: 230 bhp (172 kW) 1970-1974
  • J: 360 cu in (5.9 L) LA V8: 245 bhp (183 kW) 1974
Transmissions for 1974
need Collaboration on the available transmissions for 1974

Length, width, height, wheelbase for 1974

  • Length 191.3 in
  • Width 76.1 in
  • Height 50.9 in
  • Wheelbase 110.0 in

1978 - 1983 Dodge Challenger


This Wiki is Needs Photos, and can use your help!


Please take a moment to add any Photo you might have on this topic. It is through this type of Member collaboration that the MoparWiki will grow into being the Ultimate Mopar Infobase. The links contained in the Understanding Wikis box in the sidebar can help you get started.


The Forgotten Challengers

In 1978, Chrysler partnered up with Mitsubishi to sell their small coupe sold overseas as the Sapporo through Dodge as the Challenger. Plymouth sold virtually the same car (with a silver grill instead of the Challenger's black grill, and in different body colors) through its dealers. These cars came with an unusually large (for the era) 2.6 liter 4 cylinder engine. Mitsubishi had pioneered smoothing out the larger displacement 4-cylinder engines with its balanced crank shafts. The Challenger and Plymouth from this era had brisk performance, when compared to other 4-Cylinder Sport Coupes of the same era.

Body Styles

The only version of this era Challenger was a 2-Door Sport Coupe

Platform For 1978 - 1983 Dodge Challenger

Engines 1978 - 1983 Dodge Challenger

  • 1.6 L (98 cu in)
  • 2.6 L (159 cu in)

Transmissions 1978 - 1983 Dodge Challenger

  • 5-speed Manual
  • 3-speed Automatic

Length, width, height, wheelbase 1978 - 1983 Dodge Challenger

178.1 in, 65.9 in, 53 in-53 in.3, 99.6 in

1978 - 1983 Challenger Related Models

1978 Challenger


This Wiki is Under Construction, and can use your help!


Please take a moment to add any information you might have on this topic. It is through this type of Member collaboration that the MoparWiki will grow into being the Ultimate Mopar Infobase. The links contained in the Understanding Wikis box in the sidebar can help you get started.


a little collaborative help is needed for information
specific to this year of Challenger
1978 Challenger Colors
a little collaborative help is needed for colors
available specific to this year of Challenger
1978 Challenger Production Numbers
a little collaborative help is needed for Production
Numbers specific to this year of Challenger

1979 Challenger

a little collaborative help is needed for information
specific to this year of Challenger
1979 Challenger Colors
a little collaborative help is needed for colors
available specific to this year of Challenger
1979 Challenger Production Numbers
a little collaborative help is needed for Production
Numbers specific to this year of Challenger

1980 Challenger

a little collaborative help is needed for information
specific to this year of Challenger
1980 Challenger Colors
a little collaborative help is needed for colors available
specific to this year of Challenger
1980 Challenger Production Numbers
a little collaborative help is needed for Production
Numbers specific to this year of Challenger

1981 Challenger

a little collaborative help is needed for information
specific to this year of Challenger
1981 Challenger Colors
a little collaborative help is needed for colors available
specific to this year of Challenger
1981 Challenger Production Numbers
a little collaborative help is needed for Production
Numbers specific to this year of Challenger

1982 Challenger

a little collaborative help is needed for information
specific to this year of Challenger
1982 Challenger Colors
a little collaborative help is needed for colors available
specific to this year of Challenger
1982 Challenger Production Numbers
a little collaborative help is needed for Production
Numbers specific to this year of Challenger

1983 Challenger

a little collaborative help is needed for information
specific to this year of Challenger
1983 Challenger Colors
a little collaborative help is needed for colors available
specific to this year of Challenger
1983 Challenger Production Numbers
a little collaborative help is needed for Production
Numbers specific to this year of Challenger

2008 - 2021 Dodge Challenger

The third generation Challenger started as a carbon fiber bodied Concept car that made the show circuit in 2006. It received so many cries to be made into a production car -- that Dodge accepted the "Challenge" and started to produce the car in 2008 on theLC platform.

Concept Car

The design of the third generation Challenger is generally credited to automotive designer Michael Castiglione, working out of the DaimlerChrysler's Pacifica Design Studio in Carlsbad, California.

Its shape is closely modeled after the iconic shape of the 1970 and 1971 Dodge Challenger, now two of the world's most highly prized collector cars. But it's too easy to dismiss Castiglione's design as a carbon copy of the classic form. It isn't. In fact, the car took a year and a half to design.

Modern interpretation of a classic
The process of creating the car began 2004. The idea was to develop a hot-looking performance coupe using Chrysler's rear-wheel-drive LX platform and its Hemi V8. In other words, come up with a coupe version of the Dodge Charger RT.

Early Castiglione sketches, the car had a lot of Cuda influences, which made a lot of sense. The 1970 and 1971 Plymouth Barracuda was the sister car to the Challenger, and it's the more iconic of the two machines today. But the death of Plymouth in 2001 killed the Cuda Concept from ever seeing the light of day. Instead the car had to be a Dodge.

"I drew over 1,000 cars, 900 of which are in the trash," says Castiglione. Early sketches were all over the map, from cars with cab forward shapes to others with four individual taillights and semicircular grilles like Dodge used on the 1972-'74 Challenger.

"Early on, we just tried to capture 'Mopar' in the designs," says Castiglione who beat out two other designers for the job. "We tried to capture the beveled edges that were uniquely Mopar back in the muscle car days. If you look at an old Challenger or Charger, the lines have a snap to them. Once we figured that out, then we got more focused."

Once focused on the 1970 Challenger, an example was brought in to the design studio for inspiration. The 383-powered R/T convertible, which was painted in the classic color of Plum Crazy purple, belonged to a friend of a friend, and was chosen because it had the standard twin-scoop hood instead of the optional Shaker scoop. Castiglione had decided to emulate that hood because it was a unique Mopar design.

"The Shaker just isn't unique to Dodge," he says. "Ford and GM also used them back then." It was also a four-speed car, which means it had the iconic pistol-grip shifter. This would later influence Alan Barrington, who designed the concept car's interior.

Challenger only in your mind's eye
"Instead of merely recreating the 1970 model," says Tom Tremont, vice president of Advanced Vehicle Design, "the designers endeavored to build a Challenger most people see in their mind's eye."

That requirement meant varying from the old car's long-hood/short-deck profile was impossible. This caused Castiglione serious problems. The touchdown of the windshield is much farther forward on the modern LX chassis than it is on the old car. This moves the center of the car closer to the front wheels and inherently shortens the front end.

He compensated for this by raking the windshield radically compared to the Charger's front glass, and increasing the size of the front overhang to make the hood look longer. He also put an angled cut in the door seam to be sympathetic to the windshield rake, and moved the side mirrors farther back on the doors to fool the eye into seeing a longer hood.

Castiglione also had to find a way to incorporate the old car's asymmetrical wheelwell openings and its tucked-in rocker sections, both of which go against conventional modern car design. He achieved the desired effect by widening the front and rear tracks to 64 and 65 inches, which is even wider than the old 1970 model, and moving the rocker panels in. He also successfully reversed the basic proportions of the old car to better reflect DaimlerChrysler's modern design language of a thicker body with a shrunken greenhouse. The result is a very modern-looking coupe that perfectly fits in with Dodge's present model lineup.

Details left out include the old car's oversized chrome gas cap, which just didn't look right with the concept car's otherwise missing brightwork, and a modern version of the original Challenger's hood pins.

Long, low, wide and fast
On February 1, 2005, after nearly a year's work on the Challenger's design, the car would be built into a full-size running concept car for the 2006 Detroit Auto Show. Castiglione's deadline to hand off the full-size clay model and all of his computer data to Metalcrafters was the first week of June 2005.

Located in Fountain Valley, California, Metalcrafters built all of DaimlerChrysler's concept cars and needed about six months to build the Challenger, which is made entirely of carbon fiber. The concept car is 197.8 inches long and 78.6 inches wide, the finished car is 2.3 inches shorter and a full 4 inches wider than a four-door Charger. It's also 1.2 inches lower and sits on a 116-inch wheelbase, which is 4 inches shorter than a Charger's wheelbase and 6 inches longer than the wheelbase of a 1970 Challenger.

It all rides on massive five-spoke wheels and oversized tires that are literally squeezed up under the body. "We did a lot of wheels that looked like the original rallys," says Castiglione. "But the instant we brought the spokes out to the rims it made the wheels look larger and we wanted the largest wheels possible." He ended up with 20-by-9-inch front and 21-by-10-inch rear wheels wrapped in 255/40R20 front and 265/45R21 specially made Goodyear tires.

The paint color was also custom mixed for the car. "It looks heritage," says Castiglione. "But it's not a literal interpretation of Hemi Orange."


Under the hood, however, is some real Hemi Orange. It's on the valve covers of the 425-hp, 6.1-liter V8 that the Challenger Concept borrowed from a Dodge Charger SRT-8. The underhood look is the work of John Sodano, another designer at Pacifica. "This is the kind of car that people will want to look under the hood," Sodano says. "So I drew back to the original Hemis for inspiration."

Sodano decided that the inner fenders would be body color like Dodge did back in 1970, and the engine would be cleaned up of any unsightly accessories like an air-conditioning compressor. He also designed all the ducting that directs air from the working hoodscoops into the engine's intake plenum and spec'd out a Flowmaster exhaust with no catalytic converters.

The Hemi is backed by a six-speed manual transmission, and Dodge said the combination is good for 0-60 mph in 4.5 seconds, a quarter-mile run in 13 seconds flat and a top speed of 174 mph.


Familiar, but modern inside
Eight weeks before the design went to Metalcrafters, Barrington, 31, got to work on the interior. "When you ask people what they remember about the old Challenger's interior," says Barrington, "it's always the pistol-grip shifter, three-spoke steering wheel, the bank of round gauges and the vailstyle pleat upholstery." After 50 different designs, Barrington's final iteration incorporates all that stuff, yet it's as modern as can be.

A good example of his ability to make the old new again is the car's pistol-grip shifter. In the old car it had an old Western form to it, grab the new one, however, and it feels more like a Glock or some other modern firearm.

"I wanted a coherent cohesive design that looked like the interior and exterior of the car had the same author," he says. "That's why the faceted trapezoidal form of the instrument panel and the doorpanels mirrors the shape of the grille and the racetrack around the taillights.

"I also used brightwork to highlight the areas the driver's attention should be: the shifter, gauges, etc.," Barrington adds. The rest of the interior falls away to darkness. On the old car the designers used wood in a similar way.

To form the gauge cluster, Barrington incorporated elements of the old rally pack of gauges and the standard cluster. There are fewer and larger dials than the old standard setup had, but the dial on the far left is the largest as it used to be on the standard setup. When designing the Challenger's gauges, Barrington also drew influence from a bare engine block. "I designed the gauges' holes to appear as if you are looking down into the engine cylinders with the head off," he relates.

He also filled the largest dial with an on-board computer that can calculate the performance numbers like top overall speed, quarter-mile time and top speed for each gear.

Further cool touches include the toggle switches, the bold mechanical-looking radio and climate controls and the thick three-spoke wheel with its circular hub and pierced silver spokes. It evokes the original car's "Tuff" wheel as does the steering column ribbing. The seats are similar in shape to the buckets you get in a Charger SRT-8, only Barrington had them covered in unique black upholstery with horizontal pleats. The upholstery in a 1970 Challenger featured vertical pleats.

Body Styles of the 2008 - 2011 Dodge Challenger

All 2008 up versions of the Dodge Challenger are a 2-Door Coupe

Platform of the 2008 - 2011 Dodge Challenger

LC-Body

Related Models to the 2008 - 2011 Dodge Challenger

Engines of the 2008 - 2011 Dodge Challenger

  • 6.1 L (370 cu in) HEMI V8
  • 5.7 L (345 cu in) HEMI V8 (2009 & later)
  • 3.5 L (214 cu in) SOHC V6 (2009 & later)

Transmissions of the 2008 - 2011 Dodge Challenger

  • 4-speed Automatic (2009 & later V6)
  • 5-speed Automatic
  • 6-speed Manual (2009 & later)

Length, width, height, wheelbase of the 2008 - 2011 Dodge Challenger

  • Length 197.7 in
  • Width 75.7 in
  • Height 57.0 in
  • Wheelbase 116.0 in


2008 Challenger

On December 3, 2007, Chrysler started accepting deposits for the 3rd Dodge Challenger, which debuted on February 6, 2008 at the Chicago Auto Show and Philadelphia International Auto Show simultaneously. With a List Price of $40,095US, the 2-door coupe shared a common design with the 1st Challenger, albeit being significantly longer and taller. The Challenger chassis is a shorter wheelbase version of the LX platform that underpinned the Dodge Charger, Dodge Magnum, and the Chrysler 300. The LX platform was itself adapted from the Mercedes E Class.

All (7119) 2008 models were SRT8s and equipped with the 6.1L Hemi and a 5-speed AutoStick automatic transmission. The entire 2008 US run of 6,400 cars were pre-sold (many marked up far above the MSRP).

Production started on May 8, 2008.

Chrysler Canada offered another 670+ SRTs uniquely badged as the Challenger 500, exclusively for Canadian Dodge dealers. Chrysler of Mexico offered 100 of these cars with a 6.1 liter V8 and 425 brake horsepower to its dealers.

At the Barrett-Jackson Auction, Chrysler auctioned off two 2008 SRT8s for charity with car #1 selling for $400,000.00 to benefit the notMYkid non-profit organization, and a "B5" Blue #43 car received a winning bid of $228,143.43 -- with the proceeds going to Victory Junction Gang Camp.

Production of the limited edition 2008 SRT/8s ended in July 2008

Colors Available for the 2008 Challenger
a little collaborative help is needed for colors
available specific to this year of Challenger
Production Number Breakdown for the 2008 Challenger
  • Calendar Year in the USA were 17,423
  • 2008 Model Year Sales were 7119

2009 Challenger

Production of the expanded 2009 line-up started in early August of 2008.

Chrysler debuted the full Dodge Challenger line for 2009, with three different US trims - SE, R/T, SRT8; and the SXT for the Canadian Market.

In addition to the SRT8, which remained unchanged except for the optional 6 speed manual, the line-up included the SE and SXT which offered the 250 HP 3.5 V6, and the R/T which had a 370 hp and 398 lb·ft torque 5.7 liter Hemi when coupled with the 5 speed automatic, and 375 hp (280 kW) and 404 lb·ft (548 N·m) when matched with the same Tremec 6 speed manual stick as the SRT8.

Colors Available for the 2009 Challenger
a little collaborative help is needed for colors
available specific to this year of Challenger
Production Number Breakdown for the 2009 Challenger
  • US Calendar Year sales was 25,852
SE
R/T
SRT-8
Special Packages
There have been a number of Limited Production
Models of the 2009 version of the Challenger
We are looking for a little help (collaboration) 
with listing and describing these Limited Productions


2010 Challenger

need collaboration on the Challenger for 2010
Colors Available for the 2010 Challenger
a little collaborative help is needed for colors
available specific to this year of Challenger
Production Number Breakdown for the 2010 Challenger
a little collaborative help is needed for Production
Numbers specific to this year of Challenger
SE
R/T
SRT-8
Special Packages
There have been a number of Limited Production
Models of the 2010 version of the Challenger
We are looking for a little help (collaboration) 
with listing and describing these Limited Productions

2011 Challenger

need collaboration on the Challenger for 2011
Colors Available for the 2011 Challenger
a little collaborative help is needed for colors
available specific to this year of Challenger
Production Number Breakdown for the 2011 Challenger
a little collaborative help is needed for Production
Numbers specific to this year of Challenger
SE

Standard Equipment on the 2011 Challenger SE includes the 3.6L Pentastar V-6 that produces 305 horsepower.

R/T

For 2011, the R/T's 376 horsepower 5.7L Hemi will gain cold-air induction.

SRT-8
Special Packages
There have been a number of Limited Production
Models of the 2011 version of the Challenger
We are looking for a little help (collaboration) 
with listing and describing these Limited Productions

For the year 2011, there will be 1,492 Inaugural Edition Challenger SRT8 392s built. These cars are available in white with blue stripes or blue with white stripes only. Of the 1,492 cars to be built, 1,100 will be for the United States and the remaining 392 for Canada.

SRT-10 Concept

Drag Pak

2009 Drag Paks

The Below is the text to the original Press Release from Mopar Performance

Yearning to relive the muscle era is passé. We're ready to relive the days of high-horsepower super-stock specials being built at the factory. Forty years after Chrysler built its original drag-track specials, the 2009 Dodge Challenger Drag Race Package allows us to do just that.

While vehicle technology has changed tremendously over the past forty years, the premise behind the Drag Race Package cars hasn't: pack plenty of power into a car while stripping out the portly non-essentials. Given the 4140-lb curb weight of the 2008 Challenger SRT8, there was plenty of material for engineers to strip.

Starting with a stock Challenger body-in-white, Mopar's engineers ripped out nearly 1000 lbs of equipment deemed unnecessary for the track. Although the Drag Pack cars will roll down the same Brampton, Ontario, assembly line as the street cars, these models are spared the addition of body sealer, sound deadening, a ventilation system, airbags, and rear seats. If that wasn't enough, Mopar removed the windshield wiper assembly, side- and rear-impact beams - and subsequently, any chance the car can be DOT-certified for the street. As a result, the Drag Race Package car weighs in at approximately 1000 lbs lighter than an SRT8.

While those extra parts remain in Chrysler's parts bins, the Challenger Drag Race Package does gain some new equipment. Included with each package car is a new composite lift-off hood (yes; the scoop is functional), polycarbonate windows, manual rack-and-pinion steering, a lightweight brake system and a good old-fashioned cable throttle linkage. Mopar also modified the Challenger's wheelbase, shortening it a half inch to 116 inches, and pushed the engine mounts rearward for better weight distribution.

Those solid mounts will hold one of three available engines: a 5.7-liter or 6.1-liter HEMI V-8, or a 360 cubic-inch 'Magnum Wedge' V-8, coupled to either an automatic or manual transmission. Although performance numbers haven't yet been released, a typical 360 crate motor produces anywhere between 325 and 395 hp; we'd imagine the 5.7- and 6.1-liter motors will crank out even more power than their street versions, which are rated at 375 hp and 425 hp, respectively.

In order to qualify the Challenger Drag Race Package car to run in NHRA's Comp, Super Stock and Stock classes, Dodge plans to build at least 100 examples for customers and racers alike. Expect pricing to run in the low- to mid-$30,000s - approximately the same as a stock Challenger SRT8.


2010 Drag Pak

The changes made to the 2010 Drag Pak Challengers are Strange front brakes instead of Mark Williams, the master cylinder is and was a Strange unit. The rear suspension cradle is now a trailer axle instead of the stock independent rear suspension the racer would be replacing anyway. The wheels are white trailer wheels instead of silver/gray. They are trailer wheel/tires for transport only. The rear trunk has the cylinders so you don't have to hold it open with a stick. The 2009s had no cylinders installed and we bought them from the dealer and installed them on the cars we built. The sheet metal cover to go over the opening above the rear suspension is not welded in to allow the chassis builder to have access to the trunk area before the cover is welded in place. The seats are aftermarket and look a lot like the Viper seats that came in the 2009s. There are no other noticable changes on the 2010s.


2011 V-10 Drag Pak

The race-only V-10 powered rear-wheel drive 2011 Mopar Challenger Drag Pak features an 8.4-liter 512 cubic-inch engine with a 2-speed automatic transmission. Mopar will showcased its new drag car at the Dodge Viper Owner’s Invitational in Salt Lake City.

“With the introduction of our new 2011 Mopar Challenger Drag Pak, Mopar will be the only place to get a factory-built V-10-powered race-ready drag car,” said Pietro Gorlier, President and CEO of Mopar, Chrysler Group’s service, parts and customer-care brand. “Mopar’s new Challenger Drag Pak is a race rocket that will appeal to racers, collectors, dealers, and Dodge Viper owners.”

Based on the 2011 Dodge Challenger and finished in a Stock Eliminator and Super Stock configuration, the 2011 Mopar Challenger V-10 Drag Pak is the first and only 500-plus cubic-inch V-10 drag-race package car. The car features competition wheels and tires, a Mopar solid rear axle with performance gear ratio, a 2-speed drag race transmission with integrated roll control, a complete competition fuel system with fuel cell, and a complete interior with gauge package.

The Mopar Challenger V-10 Drag Pak features a Bright White paint scheme with color options. The Manufacturer’s Suggested Retail Price (MSRP) is $85,512

Mopar offers three options with this vehicle. First, the Competition Package includes an eight-point roll cage, six-point safety harness and a mesh window net (MSRP: $7,950, part number P5155820). Second, a Mopar logo body wrap (MSRP: $950, part number P5155892) and a range of body colors (MSRP: $6,800, part number P5155893). With the Competition Package, the car is ready to go down the drag strip.

2011 Mopar Challenger V-10 Drag Pak Highlights

  • Identification plate with unique serial number sequence
  • Primed and painted body, color options available
  • 512 cid V-10 engine
  • Unique engine calibration
  • 2-speed automatic transmission with shift assembly and built-in roll control
  • Special body-in-white modified for drag racing
    • No windshield wiper assembly
    • No HVAC system (includes block off plates)
    • No rear seats
    • No power-steering system
    • No underbody heat shields
    • Complete fuel cell assembly
    • Race headers with collectors
    • Modified tunnel for transmission clearance and one-piece drive shaft
    • Raised floor above differential for solid-axle conversion clearance
  • Polycarbonate door windows
  • Smart-glass door window system
  • Solid engine mounts
  • Mopar solid rear axle
  • Lightweight seats to accommodate 6-point harness
  • Special modified K-member with drop-out crossmember
  • Lightweight drag-race only front brake assembly
  • Manual rack-and-pinion steering
  • Front chin spoiler
  • Lightweight cooling module with electric fan
  • Lightweight instrument panel assembly
  • Special cable-operated decklid release
  • Special cable-operated throttle pedal and linkage
  • Race-style wheels and tires


Challenger Hell Cat

need some work done here

Challenger Demon

For 2018, Dodge made 3,300 (3,000 for the US and 300 for Canada) serialized SRT Challenger Demons.

Power was sourced from a supercharged 6.2-liter Hemi V8 producing 808 horsepower and 717 lb-ft of torque. With this setup, the Dodge Demon will rocket from 0-62 mph in just 2.3 seconds and do the quarter-mile in 9.65 seconds at 140 mph, which made it the fastest production car in the world at the time.

Featured in Movies or TV Shows

Vanishing Point

Magazine References:

  • Mopar Action February 2011 pages 30-35 It's A Draw
  • Hemmings Muscle Machines February 2011 page 10 A New Challenge(r)
  • Mopar Action April 2011 pages 24-29, 94-96 Meeting the Challenge

External Links & Wiki Topic References


Random Page | Longest Wikis | Oldest Wikis | Newest Images | Newest Wikis | List of Categories | List of Every Freakin Wiki



Register to Edit
It takes less than 5 minutes to request registration for editing, and we try to approve within 24 hours. Click the Register Link in the Top Bar.
MoparWiki Help
While editing Wikis may at first glance appear a little overwhelming, it really isn't. You will find this site's HELP (link found in the sidebar) to be very strong and easy to understand. The best way to start is with small edits and working on your user page -- and you will become a Pro in no time.