Slingshot

From MoparWiki
Revision as of 00:47, 31 March 2020 by BK (talk | contribs)
Jump to: navigation, search


This Wiki is Under Construction, and can use your help!


Please take a moment to add any information you might have on this topic. It is through this type of Member collaboration that the MoparWiki will grow into being the Ultimate Mopar Infobase. The links contained in the Understanding Wikis box in the sidebar can help you get started.


Intro

The front engine dragster is a type of racing car purpose built for drag racing. Commonly known as a "rail", "digger", or "slingshot", it is now considered obsolete, and is used only in nostalgia drag racing. Wheelbases ranged from 97 to 225 inches.

Replace the photo file name and description with appropriate for this car model
Replace the photo file name and description with appropriate for this car model
Replace the photo file name and description with appropriate for this car model
Replace the photo file name and description with appropriate for this car model
Replace the photo file name and description with appropriate for this car model

History

The front engine dragster came about due to engines initially being located in the car's frame in front of the driver. They did not use (and current dragsters still do not use) any form of suspension. Because of this, these types of vehicles were prone to becoming unstable at speed. This is due to their making 2,000–3,000 hp, plus having poor tire technology, short wheelbases, and very lightweight. (This was demonstrated to extremes in Fuel Altereds.) The driver sits angled backward, over the top of the differential in a cockpit situated between the two rear tires, a design originating with Mickey Thompson in 1954, as a way of improving traction. This position led to many drivers being maimed when catastrophic clutch failures occurred.

Introduced with the start of organized drag racing, they were limited by the availability of traction from their rear tires or "slicks". A number of dragsters with four rear drive wheels were attempted as well, including cars by Art Chrisman (along with his brother, Lloyd, and partner Frank Cannon), Bill Coburn, and Eddie Hill. (Coburn and the Chrisman brothers used twin engines, also.)

Push starts were necessary until National Hot Rod Association (NHRA) mandated self-starters in 1976. After burnouts, cars would be pushed back by crews; this persisted until NHRA required reverse gears in 1980.

The slingshot produced a number of fatal wrecks in the 1960s, including Mike Sorokin's and John Mulligan's (months after suffering severe burns in a fire at the Nationals in 1969). Clutches, bell housings, blowers, and engines exploded, with ETs hitting 6.43 seconds by the end of 1969, a pass recorded by Mulligan to qualify #1 at The Nationals. Other accidents included a flip (what today would be called "blowover") by Jim Nicoll at the 1970 Nationals after a clutch failure.

The slingshot's advantages, putting weight over the rear tires, now served to cause the front end to lift, as tire technology improved, to the point ballast, sometimes hundreds of pounds' worth, had to be added over the front axle, while others, like Ronnie Scrima (on his Scrimaliner) and Tony Nancy, would mount a winglet.

The drawbacks led to several attempts at rear-engined cars, but the rail was only supplanted by the rear-engined type (which is now standard) when Don Garlits introduced Swamp Rat XIV in 1971. He designed the car while in hospital, having suffered from severe injuries caused by an exploding clutch.

References

Related Links


Random Page | Longest Wikis | Oldest Wikis | Newest Images | Newest Wikis | List of Categories | List of Every Freakin Wiki



Register to Edit
It takes less than 5 minutes to request registration for editing, and we try to approve within 24 hours. Click the Register Link in the Top Bar.
MoparWiki Help
While editing Wikis may at first glance appear a little overwhelming, it really isn't. You will find this site's HELP (link found in the sidebar) to be very strong and easy to understand. The best way to start is with small edits and working on your user page -- and you will become a Pro in no time.