Sandbox-B

From MoparWiki
Revision as of 20:46, 26 February 2012 by BK (talk | contribs)
Jump to: navigation, search
this is one of the three sandboxes where would be collaborators can play around with their formatting until it looks right -- and then add it to the
article they want to improve. Newbies are really encouraged to use one of the sandboxes to play around in (below this text), and delete when finished
they other sandboxes are Sandbox-A & Sandbox-C. Delete your text when finished, and use another sandbox if there is text in this one.


Welcome to the MoparWiki
Our Mission
Now is the time for all good men to come to the aid of their party


Another Sub Title
Now is the time for all good men to come to the aid of their party


Well Seasoned MoparWikis
Subtitle
Now is the time for all good men to come to the aid of their party


Another Sub Title
Now is the time for all good men to come to the aid of their party
MoparWikis Well on the Way
Subtitle
Now is the time for all good men to come to the aid of their party


Another Sub Title
Now is the time for all good men to come to the aid of their party
MoparWikis Needing Serious Help
Subtitle
Now is the time for all good men to come to the aid of their party


Another Sub Title
Now is the time for all good men to come to the aid of their party


Featured MoparWiki 1
Virgil Exner
The X-Man

To the most of us MoparStyle kind of guys, Virgil Exner is most famous for his “Forward Look” years at the Chrysler Corporation. I like to refer to him as the “Father of Fins”. However, his auto design career started long before his years at Chrysler – and continued after he left Chrysler.

My research finds that the Ex was born September 24, 1909 in Ann Arbor Michigan, and adopted almost immediately by George and Iva Exner. At an early age, Virgil started to show an interest in athletics and art. When looking at photos of him at any age, you will see that he had a good athletic built – and was very dapper. Exner also showed an interest in cars at a young age, and collected car catalogs. As a teenager, Exner insisted on his friends calling him Ex – as he felt the name Virgil to be too feminine. He attended Notre Dame University for art training but had to drop out in 1928 for financial reasons. He stayed in Southbend, IN (home of Notre Dame and Studebaker) and took a job drawing advertisements for Studebaker. A friend suggested he contact Harley Earl at General Motors, and show him his work. When Harley Earl saw Exner’s work, he hired him to work in the Pontiac design studio.

Ex with wife and Son

In 1938, the Raymond Loewy industrial design firm hired Exner away from Pontiac. Ex would work on Studebakers for the next eleven years. Most feel that he was most responsible for designing the 1947 Starlight coupe, despite Raymond Loewy grabbing all of the credit for the design. The 1947 Studebakers were the first Post-WWII American cars introduced to the public. Studebaker’s slogan in 1947 was “First by far with a post-war car”. He was also instrumental in the design of the famous “bullet-Nosed” Studebakers – but did not receive proper credit for that either. I have read much on Raymond Loewy . He and his firm is credited with the late forties and early fifties Studebakers, the 1963 Studebaker Avante, the design of the current Coke Bottle, streamlined trains, streamlined toasters, and the modern look of many items we take for granted today. However, the more I read about Raymond Loewy , the more I find that his talent was hiring the best designers, managing the projects they worked – but taking all credit for their work. Since his company employed the designers, he felt that there was no reason to give credit to others. Many famous designers who worked for Raymond Loewy left for this reason. It is said that Ex and Lowery despised each other.

In 1949, Exner joined Chrysler as head of the Advance Styling Group, where he helped to create “idea cars” like the DeSoto Adventurer, Dodge Firearrow, K-310, Chrysler d’Elegance, Plymouth XNR, and a few others. After World War II, the Chrysler Corporation cars were the stodgiest looking of all American cars. Chrysler’s president, K. T. Keller, insisted that a car’s roofline should be high enough for a man to wear his hat while driving. While the other car companies were making their cars lower and sleeker – Chrysler cars were tall and boxy, costing Chrysler market-share. Directors at Chrysler soon realized that something had to change, and Exner became Chrysler’s first vice-president of styling.

Immediately, Exner designed the production models to be lower, sleek, and tiny fins started to sprout. He referred to this as the 'Forward Look". Ex’s designs combined with Chrysler’s technology (Hemi engines, first alternator, first power steering, shifter on the dashboard – and then later pushbuttons, etc) increased Chrysler Corporation’s market share. Years ago, I read a Studebaker book were it told of how envious Raymond Loewy was with Exner’s success. Legend has it that Loewy made a 1/12 scale clay mock up of a car with gigantic fins. He then sent this mockery to Exner with an insulting note about the design of his cars.

Despite the successes Ex brought Chrysler, Virgil Exner would ultimately become a scapegoat for others at Chrysler’s errors. It started with the cars of 1957, when Chrysler’s rush to manufacturing caused quality issues. The biggest was these cars were rusting fast. Chrysler was due for a major design change for 1962, and the 1961 cars were to be a transition car – taking the cars from fins to the new style due in 1962. Unfortunately, Virgil Exner had a heart attack in 1956 (when the 1961 cars were being designed) – and the 1961 car did not have enough of his direction. Ex returned to work in 1957 and immediately went to work on the 1962 cars.

In the summer of 1959, a Chrysler executive received a tip that Ford and GM were going to downsize their cars dramatically, and executives viewed “Spy Photos” of the downsized cars. There was panic because they were convinced that customers would buy the smaller cars – and not Chrysler’s cars. The designs for the 1962 Chryslers car had already been set – but the directors immediately gave Exner the directive to shorten the wheelbase by three inches and to make it eight inches narrower. Virgil Exner told the directors that doing that to his designs would make the car look like Hell – but it fell of deaf ears.

When the 1962 models of Ford and GM roll out, Chrysler found out that they had been a victim of a hoax by Chevrolet. The car buying public agreed with Exner that just lopping inches off the car would make it ugly – and would not buy them. Chrysler needed a scapegoat, so they fired Ex.

 More
Featured MoparWiki 2
Jeep
WWII Jeeps

History

World War I started the age of mechanization of the US Army. The Army bought many vehicles from many vendors to move men and materials from location to location. By the middle 1930’s the Army realized the logistical nightmare causing maintenance and supply issues caused by having so many vendors and vehicle types. The desire to standardize on a smaller group of vehicles led to the search for smaller, faster easier to maintain vehicle.

The army tested several vehicle concepts over the years, including a vehicle dubbed the “Belly-Flopper”. The “Belly-Flopper” was designed much like a cross between a kid’s sled and a go-cart. The driver and a passenger lay on their stomachs to drive the vehicle, unseen by the enemy. The specifications for 70 units of a test vehicle were sent out on July 7, 1940, called for:

  1. A driving front axle with 2-speed transfer case including provisions for disengaging the front axle drive.
  2. A body of rectangular design with a folding windshield and 3 bucket seats.
  3. Increased engine power (presumably in respect to the Belly-Flopper prototype).
  4. Means for towing.
  5. 30-caliber machine gun mount.
  6. Blackout lighting.
  7. Oil-bath air cleaner.
  8. Hydraulic brakes.
  9. Full floating axles.
  10. Wheelbase of 80".
  11. Maximum height of 40".
  12. Maximum weight of 1275 lbs.
  13. Approach and departure angles of 45 and 40 degrees, respectively.
  14. Must reach 50 mph on hard surface.
  15. Special bracing for a pintle hook setup.
  16. No aluminum to be used for cylinder head.
  17. At least 4 cylinders.
  18. 8 of the 70 vehicles had to be four-wheel-steer.

Only three companies, of 135 invited to bid, responded to the contest, Ford Motor Company, Willys-Overland (pronounced Willis-Overland), and American Bantam Car Company and of these, the Bantam Car Company was the most aggressive. They had their blueprints of their vehicle into Washington in 5 days. Bantam delivered a prototype by the September 23, 1940 deadline. With war breaking out in Europe, both Ford and Willys were allowed to submit vehicles for testing. Both of these competitors were also given access to the Bantam plans, explaining the look-alike similarities of the three prototypes. The Army ordered a total of 1500 of each vehicle for further testing and early 1941 saw these vehicles entered into Army inventory. Willys and Ford received the contracts to actually build the vehicles based on Bantam’s designs, as Bantam didn’t have suitable manufacturing facilities. Bantam did get the contract to build the trailers need for the vehicles. Both the Willys and Ford parts were interchangeable.

The name Jeep is said to derive from several sources. Some say the name came from the GP (General Purpose) designation, others say it came from the cartoon character “Eugene, the Magical Jeep” from the Popeye cartoons. Eugene had the ability to go anywhere (by magic of course), as did the Willys vehicle.

The Jeep became the vehicle of choice for the Army and it was said that the little vehicle could move faster than a tank and go places that tanks couldn’t go. The Jeep (both the Willys MB and Ford GPW) proved to be a reliable, well made vehicle, impressing soldiers who both drove and maintained the vehicles. It was said at the time that Jeep won the war.


Post War

After the War, as soldier were returning home, many wanted a Jeep of their own. Willys, seeing a demand for the Jeep trademarked the name, for its line of vehicles based on the venerable vehicle.

The Jeep CJ-2A (Civilian Jeep 2A) was introduced in late 1945, and was mechanically identical to the MB that was produced for the Army, but with a few differences, such as chrome trim and larger headlamps. The fuel tank intake was on the left side panel, and the spare tire was moved to the rear tailgate. The rear panel also became a flip down tailgate. The first year saw only 1,824 units made, but the end of production in 1949 produced a total of nearly 137,000 units.

 More


Collaborate
Subtitle
Now is the time for all good men to come to the aid of their party


Another Sub Title
Now is the time for all good men to come to the aid of their party
Edit
Subtitle
Now is the time for all good men to come to the aid of their party


Another Sub Title
Now is the time for all good men to come to the aid of their party
Newbies
Your User Page
Now is the time for all good men to come to the aid of their party


The Sandboxes
Now is the time for all good men to come to the aid of their party
SysOp Needed
Subtitle
Now is the time for all good men to come to the aid of their party


Another Sub Title
Now is the time for all good men to come to the aid of their party